tioga revolvers, how to fit/whats missing- pics up

[pago79]

unfortunately not. found the pics a while ago on the web and saved them for the case of finding my set of revolvers...

 

[ishaw]

Thanks for getting back to me. Hopefully someone on here will be able to help.

 

[gibbleking]

Lots of alloy or stainless washers would do the trick..try the local nut and bolt suppliers...

 

[ishaw]

Lots of alloy or stainless washers would do the trick..try the local nut and bolt suppliers...

Agreed, but I'd at least need a clue as to width, either individually or in total. It's also a bit of unexpected hassle after buying them as nos, and expecting them to be complete.

If anyone can help on the size front, that would be great.

 

[WD Pro]

I would steer clear of a washer stack and get a proper spacer made (it will be cheap) when someone let's you know the correct size

WD

 

[ishaw]

I would steer clear of a washer stack and get a proper spacer made (it will be cheap) when someone let's you know the correct size

WD

It's my preferred option, here's hoping someone can help out with sizes.

 

[terryhfs]

Use 1mm washers in a stack to get the right size, then get a proper spacer in that width.

 

[ishaw]

Use 1mm washers in a stack to get the right size, then get a proper spacer in that width.

How will I know what the right size is? Will happily give this a go if anyone can advise how I will know it it right.

 

[gibbleking]

just get loads of them and stick them on the exterier axle util the chainset is near the stays like mormal bbs

 

[BoyBurning]

Ian:

I have a NOS set too - will get dimensions of spacers for you tomorrow night or Tuesday night if you don't get them beforehand.

As an aside, my set has the silver rings. If you fancied a swap let me know as ideally black would suit my build better...!

Cheers,
BB