Prototype On One Scandal Frame slot drop single speed/fixie
Want back what I paid so £180 posted
This is a bit out of the ordinary from your usual On One Scandals, It’s an early Scandal prototype built for and raced by an On One sponsored rider in Mountain Marathons.
The geometry on this frame had been altered from standard Scandals and the design uses a bent seat tube to give a slacker seat angle with lots of tyre clearance. Slightly shorter chainstays and front centre, slacker head angle and longer effective top tube give a bike that responds great when in the saddle and flies uphill when you're out of the saddle.
This frame is disc only and has slot drop (track style) rear dropouts, there is no gear hanger so this is designed to run single speed or fixie only (this is how it was raced).
Condition - used so has some rubbing and a couple of small scratches to the black Anodized finish.
There is a mark where the chainring temporarily caught the chainstay although most of the marks/rubs have been touched in.
Frame sizes
BB to top 16 inches
22 inches actual top tube C2C
Good for riders 5’8” through to 6’
Designed for rigid forks of 465/470mm a2c so should run an 80mm travel 29er suspension fork if you so desired, but what would be the point of weighing down this featherweight frame with a bouncy front end.
Bought in April and unridden since but partially built up, I am only selling as I also have a Singular Swift and cannot justify two 29ers at the moment
Orange (coloured) finishing kit including Charge and A2Z parts
Total cost of parts £70+ to buy so would like £50 posted.
A nice finishing kit perfect for an Orange build, all items new and unused, from a P7 build that didn’t get off the ground.
Includes
Charge x Wiggle Spoon saddle (limited edition)
Charge x Wiggle Sponge grips (limited edition) nb no end caps included.
A2Z Cromo QRs
A2Z Chainring bolts for 5 ring triple.
A2Z bottle cage bolts (3 sets)
Easton Monkey Lite SL O/S riser bars
£45 Posted SOLD!!!!
Used but not abused carbon riser bars, minor marks to clamping areas but not noticeable when built up.
Here’s what Easton say:- The world's lightest XC riser bar is now even stronger thanks to Easton's CNT Enhanced Resin System. Carbon nanotubes are added to strengthen and toughen the resin matrix. The result is the most advanced carbon bar on the planet.
Weight 146 grams (31.8/635 mm)
Diameter 31.8 mm
Width 635 mm (31.
Rise Low rise
Bend 8° sweep | 4° upsweep
Colour New carbon unidirectional design
Material Proprietary Easton CNT composite
Features
Phenomenal fatigue life and increased toughness
Reinforced stem and brake lever clamping zones
Not compatible with bar ends
Syncros Pro series flat bar.
£15 posted
A super lightweight set of flat bars in 7075 Al, marks to grip and clamp areas and decals worn from use but otherwise good nick with no dings on dints.
Want back what I paid so £180 posted
This is a bit out of the ordinary from your usual On One Scandals, It’s an early Scandal prototype built for and raced by an On One sponsored rider in Mountain Marathons.
The geometry on this frame had been altered from standard Scandals and the design uses a bent seat tube to give a slacker seat angle with lots of tyre clearance. Slightly shorter chainstays and front centre, slacker head angle and longer effective top tube give a bike that responds great when in the saddle and flies uphill when you're out of the saddle.
This frame is disc only and has slot drop (track style) rear dropouts, there is no gear hanger so this is designed to run single speed or fixie only (this is how it was raced).
Condition - used so has some rubbing and a couple of small scratches to the black Anodized finish.
There is a mark where the chainring temporarily caught the chainstay although most of the marks/rubs have been touched in.
Frame sizes
BB to top 16 inches
22 inches actual top tube C2C
Good for riders 5’8” through to 6’
Designed for rigid forks of 465/470mm a2c so should run an 80mm travel 29er suspension fork if you so desired, but what would be the point of weighing down this featherweight frame with a bouncy front end.
Bought in April and unridden since but partially built up, I am only selling as I also have a Singular Swift and cannot justify two 29ers at the moment
Orange (coloured) finishing kit including Charge and A2Z parts
Total cost of parts £70+ to buy so would like £50 posted.
A nice finishing kit perfect for an Orange build, all items new and unused, from a P7 build that didn’t get off the ground.
Includes
Charge x Wiggle Spoon saddle (limited edition)
Charge x Wiggle Sponge grips (limited edition) nb no end caps included.
A2Z Cromo QRs
A2Z Chainring bolts for 5 ring triple.
A2Z bottle cage bolts (3 sets)
Easton Monkey Lite SL O/S riser bars
£45 Posted SOLD!!!!
Used but not abused carbon riser bars, minor marks to clamping areas but not noticeable when built up.
Here’s what Easton say:- The world's lightest XC riser bar is now even stronger thanks to Easton's CNT Enhanced Resin System. Carbon nanotubes are added to strengthen and toughen the resin matrix. The result is the most advanced carbon bar on the planet.
Weight 146 grams (31.8/635 mm)
Diameter 31.8 mm
Width 635 mm (31.
Rise Low rise
Bend 8° sweep | 4° upsweep
Colour New carbon unidirectional design
Material Proprietary Easton CNT composite
Features
Phenomenal fatigue life and increased toughness
Reinforced stem and brake lever clamping zones
Not compatible with bar ends
Syncros Pro series flat bar.
£15 posted
A super lightweight set of flat bars in 7075 Al, marks to grip and clamp areas and decals worn from use but otherwise good nick with no dings on dints.
