1998 rockhopper build

Would anybody know what rear derailleur hanger I need to suit this frame? It's an aluminium 1998 rockhopper PXL_20220120_190355541.jpg PXL_20220120_190401052.jpg
 
Last edited:
PXL_20220309_190634689.jpg


Some further development on the build. The drop bars look a little odd. Hopefully tyres balance it out.

Next up is the headset
V Brakes
Cabling
Seat
Bar tape to finish it off
 
Ok, I have now fitted the FSA headset and bars. Final items to go will be seat, v brakes, pedals and bar tape.

I also need to fit tyres and I would like to go tubeless, will it be possible on these narrow mavics I have?
 

Attachments

  • PXL_20220329_184634382.jpg
    PXL_20220329_184634382.jpg
    517.4 KB · Views: 16
  • PXL_20220329_184324260.jpg
    PXL_20220329_184324260.jpg
    345.3 KB · Views: 15
  • PXL_20220329_184318928.jpg
    PXL_20220329_184318928.jpg
    257.1 KB · Views: 13
  • PXL_20220329_182959369.jpg
    PXL_20220329_182959369.jpg
    244.9 KB · Views: 12
  • PXL_20220329_183208584.jpg
    PXL_20220329_183208584.jpg
    247.3 KB · Views: 13
  • PXL_20211116_222138578.jpg
    PXL_20211116_222138578.jpg
    399.8 KB · Views: 13
  • PXL_20211116_222146972 (1).jpg
    PXL_20211116_222146972 (1).jpg
    497.7 KB · Views: 15
34.9mm nukeproof seat post clamp is like a smidge to small. What size should I get for this. I was sure 34.9mm would do it.
 

Attachments

  • PXL_20220405_212800793.jpg
    PXL_20220405_212800793.jpg
    247.7 KB · Views: 5
  • PXL_20220405_212753415.jpg
    PXL_20220405_212753415.jpg
    242.4 KB · Views: 5
Also, last major item I need to go IAH the build are v brakes. What is the best suggestion that will work with the sensah SRX pro levers? Are the ratios going to be ok? Thanks.
 
34.9mm nukeproof seat post clamp is like a smidge to small. What size should I get for this. I was sure 34.9mm would do it.
I thought I needed a 34.9mm one for my Stumpjumper (that's the seat tube size) picked a rather nice Hope one up but it didn't fit :rolleyes:

So turns out you need a 36.4mm, this fitted just fine.
 
Bit of an update on the build. Have gone for a carbon fork and disc brake up front with a v brake at the back. I'm pretty close to finishing it just waiting on a few more bits to arrive.
 

Attachments

  • PXL_20220605_125714508.jpg
    PXL_20220605_125714508.jpg
    493 KB · Views: 17
Ok, so the build is very close to being complete. I'm just indexing the gears and bar tape is to go on.

There is an issue with the front wheel hub the wheel slightly pulls to the left towards the disc brake when braking. Suspect it is the wheel bearings. Will get this looked at by lbs next week. All in all I think it has turned out pretty well.
 

Attachments

  • PXL_20220707_175942839.MP.jpg
    PXL_20220707_175942839.MP.jpg
    1.2 MB · Views: 19
  • PXL_20220707_175950630.MP.jpg
    PXL_20220707_175950630.MP.jpg
    948.3 KB · Views: 19
  • PXL_20220706_180431155.jpg
    PXL_20220706_180431155.jpg
    499.5 KB · Views: 19
Back
Top