A little used set of 172.5mm Rotor 3D+ MAS aero cranks and matching 110mm BCD 53/38t Aero Q-Rings. The cranks are very nice CNC machined arms with a 30mm spindle (compatible with most frames, but you'll need the correct BB for your frame). No important scrapes or marks to the arms. The chainrings are Rotor's Q-ring system, with various positions available. The spider is the MAS version, which doubles the available positions, so the rings can be adjusted in 2.5 degree intervals.
Rings are 9/10 speed compatible, and show signs of use but only because they're black and have lost some anodising due to chain rub.
The cranks and rings work well together, but are standard 110mm BCD so each can be used with other rings/cranks no problem at all.
The only downside to these is that the black anodising seems to be faded/mottled, but I still haven't given them a good clean so they might turn out OK.
No BB included - I don't have one, but as mentioned, the BB required depends on your frame.
Having checked on the Rotor page (which redirects to Velotechservices), these cost 339 GBP for the cranks and 180 GBP for the chainrings when new!
I'm asking 150 GBP for the set, which includes tracked postage to the UK/europe from Spain
thanks
Rings are 9/10 speed compatible, and show signs of use but only because they're black and have lost some anodising due to chain rub.
The cranks and rings work well together, but are standard 110mm BCD so each can be used with other rings/cranks no problem at all.
The only downside to these is that the black anodising seems to be faded/mottled, but I still haven't given them a good clean so they might turn out OK.
No BB included - I don't have one, but as mentioned, the BB required depends on your frame.
Having checked on the Rotor page (which redirects to Velotechservices), these cost 339 GBP for the cranks and 180 GBP for the chainrings when new!
I'm asking 150 GBP for the set, which includes tracked postage to the UK/europe from Spain
thanks
