Rock shox quadra 10 maintanence Help!

[Tanerrona]

Hi all.

I got this beautiful Rock Shox quadra 10 fork. Left arm is not moving so i decided to maintain it. I removed top cups and removed eloksamels but i cant remove arms. There is not any screw in the tubes. How can i remove this arms?
Thanks in advance.

 

[FluffyChicken]

Re:

The elastomers are in good condition

The grey 'lower legs' come of, the inner 'stanchions' do not.

Service guides are in the Archive&Gallery
http://www.retrobike.co.uk/gallery2/v/M ... e/Service/

You may want to WD40/GT85 the insides and seals to get them to move a bit.

 

[Tanerrona]

Re: Re:

The elastomers are in good condition

The grey 'lower legs' come of, the inner 'stanchions' do not.

Service guides are in the Archive&Gallery
http://www.retrobike.co.uk/gallery2/v/M ... e/Service/

You may want to WD40/GT85 the insides and seals to get them to move a bit.

The thing is, lower legs doesnt come off. İ looked at the sevice manuel and it says there is a hex key inside the legs. But as you see in the picture, there is not any hex key in the legs.

 

[FluffyChicken]

Re:

Have a knock around it could be something in the way.

It may be like the mag (so follow 93 Quadra) and circliped in

 

[michael franks]

Re:

I'm not certain but I think that what you are seeing at the bottom of the stanchion is simply a cap that the elastomer 'sits' on. If you can remove it you'll see the top of the hex bolt a couple of inches further down.

 

[Tanerrona]

Re: Re:

I'm not certain but I think that what you are seeing at the bottom of the stanchion is simply a cap that the elastomer 'sits' on. If you can remove it you'll see the top of the hex bolt a couple of inches further down.

Sorry but that is not a cap ı tought that before and tried to remove it first but it is not a cap.

 

[Tanerrona]

Re: Re:

Have a knock around it could be something in the way.

It may be like the mag (so follow 93 Quadra) and circliped in

I fallowed 93 Quadra, removed retaining ring, sharply pulled down lower tubes but lower tubes didnt come off. I sprayed all of the part with WD-40 for 2 days to remove them easily but when i pulled down lower tubes, something hold them.

 

[FluffyChicken]

Re:

I've not done 93 before, but if they are anything like mags then a pull will not separate them. 100PSI+ often does the trick, but they are air oil forks.
The seals hold them tight in place.

Unfortunately without the Q10 in front of me, not a lot I can advise.


Clean them out, dump fork oil in and let it swap into the bushings etc.
Dump it out and see how it moves.

 

[Tanerrona]

Re: Re:

I've not done 93 before, but if they are anything like mags then a pull will not separate them. 100PSI+ often does the trick, but they are air oil forks.
The seals hold them tight in place.

Unfortunately without the Q10 in front of me, not a lot I can advise.


Clean them out, dump fork oil in and let it swap into the bushings etc.
Dump it out and see how it moves.

Thnxk for your answers. Nothing works better to find another fork