Raleigh Dynaflite SBDU 753.... 'Manager Special'
- Thread starter vcballbat
- Start date
vcballbat
Senior Retro Guru
I understand that some would go down the restore route but because of the bike's historical importance I feel that preserve is the way to...as they say "its only original once". There is some surface rust and crazing under the paint but I've had a good prod around and its nothing terminal. Any advice on rust treatment products that won't damage the paint and decals would be greatly appreciated..
Peachy!
Retrobike Rider
BoTM Winner
Gold Trader
rBoTM Triple Crown
rBotM Winner
98+ BoTM Winner
Claud Butler Fan
VCC Claud Butler ME
- Feedback
- View
Here’s a blow-by-blow section on localised paint repair that I did for @The History Man on one of his Overbury’s steel frames.
It worked out well for a metallic but should be seamless on a black frame.
Happy to discuss via PM if you want me to do the same for you.
www.retrobike.co.uk
It worked out well for a metallic but should be seamless on a black frame.
Happy to discuss via PM if you want me to do the same for you.
Incoming Overbury’s again
One tantalising picture has been received. Schneider Trophy winner?
www.retrobike.co.uk
vcballbat
Senior Retro Guru
Cheers for the offer Peachy great work,Here’s a blow-by-blow section on localised paint repair that I did for @The History Man on one of his Overbury’s steel frames.
It worked out well for a metallic but should be seamless on a black frame.
Happy to discuss via PM if you want me to do the same for you.
Incoming Overbury’s again
One tantalising picture has been received. Schneider Trophy winner?
I'm thinking mine is more than re-touching as the paint damage is along the top surface of the tubes. Maybe the 40 years of dust that had settled on the top of the tubes had retained moisture that has then penetrated the paint. The bike will now be kept in a warm dry environment an used on dry days so will be a case of how to clean and protect the existing paint which is good on the sides and bottom of the tubes. Will post some more pictures close up of the tubes and the weigh in. What did suprise me was how easy the alloy Royce bottom bracket cups came out for the first time in 40 years with a cheap adjustable peg spanner, I was dreading it, expecting them to be seized solid... what a relief..☺
TV
vcballbat
Senior Retro Guru
I think my frame was built after the NYC show bike so probably the third frame built with an oval to round seat tube. I think that the very first prototype frame is the Track Pursuit Frame with a fully oval seat tube and special oval seat post. While researching my lugged Dynaflite frame I found this brilliant old film about Raleigh's head of product design and development Alan Oakley. You can jump sixteen minutes into the film when Alan jumps into his Ford Granada and heads off to the Specialist Bicycle Development Unit at Ilkeston...
Watch Raleigh: Alan Oakley - BFI Player
Alan Oakley is the man that gave Britain the iconic Raleigh Chopper bike. This 1980 profile finds him moving from drawing board to boardroom.
player.bfi.org.uk
vcballbat
Senior Retro Guru
The frame is weighing in at 1720g with the Super Record cup & crown race, so deduct 40g gives us a very slim 1680g. Seven of the eight ferrules are still stuck in the 'divers helmet' cable guides. The NYC frame would have just three cable guides, down tube shifter and front mech braze ons and vertical dropouts.
Similar threads
