1995 SPINNER Grey P2 DB - 1995 Grey P2 TB - 1996 Grey P2 TB

[KonaJJ]

1995 (Date Stamped) Project 2 Forks, In 96" Grey, Decals 99.8% intact, Good Condition Paint, chips to suit age, CM/TB (I do believe stamps) The steer tube is 143mm – 14mm Threaded, all in a tidy set of P2’s - £30 To your door insured & tracked. SOLD

1996 (Date Stamped) Project 2 Forks, In 96" Grey, Decals 99.6% intact, Good Condition Paint, chips to suit age, CM/TB. The steer tube is 143.5mm – 31mm Threaded, all in another tidy set of P2’s - £36 To your door insured & tracked. SOLD

1995 (Date Stamped) Project 2 Forks, SPINNER , In 96" Grey, Decals 99.8% intact, Very Good Condition Paint, CM/CM (Double Butted) The steer tube is 123mm – 31mm Threaded, all in a very tidy set of P2’s I ran on an 18” frame with an extender! - £25 To your door insured & tracked.

 

[Anthony]

Just to say those are all 1996 forks. 1995 P2s have Project Two written down the side of the blade with an orange flash underlining the letters.

 

[KonaJJ]

ahh!, are you sure, even with 1995 stamps??

 

[KonaJJ]

The production date stamp is 95 and correct, the paint and decals are 96, there are no differences.

 

[deepsubz]

PM sent

 

[KonaJJ]

PM Replied

 

[KonaJJ]

1 Set SOLD PP

The other 143mm pair will fit an 18" frame no problem, also I used the 123mm ones on my 18" LD with an ahead extender, it worked a treat.

 

[Anthony]

The production date stamp is 95 and correct, the paint and decals are 96, there are no differences.

Most 1996 bikes were made in 1995 - 1996 bikes went on sale about September 1995 and were built months earlier. I am not sure whether there were any differences in physical specification or not, but the colours and decals were different and other parts, in particular the stems, were keyed to the P2 colour. If you have a 1995 Kona with 1995 parts, the 96 P2 won't look right.

This is a 1995 P2. As you can see, the 1995 Velocity is the same colour and has the same orange flash, which also keys in to the colour in the spiral.

 

[davroos]

What size are they? 1 or 1 1/8?

Thanks

 

[KonaJJ]

1 1/8th