The Broken Parts- help each other repair Thread!

[Benandemu]

Now this is a longshot....


On a left hand XT M739 V brake lever there is a small plasic insert that screws into the lever where the barrel of the cable goes. It is secured by 2 very small screws. It stops the roller from moving around inside the hole of the lever, and therefore gives a stronger pull on the brakes.

Does anybody have what I seek please?

 

[FELINO]

Hello
Does anyone know how to rebuilt a rear rockshox deluxe from 97 ?
Nothing on the web...
Thanks for your time.

 

[FluffyChicken]

Hello
Does anyone know how to rebuilt a rear rockshox deluxe from 97 ?
Nothing on the web...
Thanks for your time.

Is this close enough ?
http://members.home.nl/children-of-the- ... Manual.pdf

 

[tony edwards]

MANITOU MARSc SUSPENSION FORKS

Hi I have a pair of the following
MANITOU MARSc SUSPENSION FORKS 2000 model
sadly the steerer stem has snapped in two any one got a replacement steerer crown and legs? The fork outer and the internals i have are in fairly good condition seems a shame to have to bin them.
Cheers Tony

 

[FELINO]

Hello
Does anyone know how to rebuilt a rear rockshox deluxe from 97 ?
Nothing on the web...
Thanks for your time.

Is this close enough ?
http://members.home.nl/children-of-the- ... Manual.pdf

incredible... not how to OPEN it... but a manual... I spent hours to find one... thanks a lot !

 

[SEANSTEPHENS]

p

hi, here is my orange, which i really need the stem out of. the thing is, the bolt that goes down through it is rounded off where the allen key is inserted, and i need it out without any damage to the stem. can anyone help? cheers, sean

 

[TheGreenRabbit]

Re: p

hi, here is my orange, which i really need the stem out of. the thing is, the bolt that goes down through it is rounded off where the allen key is inserted, and i need it out without any damage to the stem. can anyone help? cheers, sean

Have you tried to bash in a star bit (torx), but im guessing it may be a little hard for that.

 

[SEANSTEPHENS]

Re: p

hi, here is my orange, which i really need the stem out of. the thing is, the bolt that goes down through it is rounded off where the allen key is inserted, and i need it out without any damage to the stem. can anyone help? cheers, sean

Have you tried to bash in a star bit (torx), but im guessing it may be a little hard for that.

its highly tightened . force probably wont get it out

 

[Xesh]

Re: p

hi, here is my orange, which i really need the stem out of. the thing is, the bolt that goes down through it is rounded off where the allen key is inserted, and i need it out without any damage to the stem. can anyone help? cheers, sean

The easiest way to get this out is to drill the head of the bolt until it snaps off.

Start off with a 6mm drill bit and go up in 0.5 - 1mm increments until it's done.

All you do is drill just a bit deeper than the bit where the allen key fits. If you go a bit at a time the bolt should eventually break and all you'll need to replace will be the bolt itself.

 

[Mr Panda]

Yep - what Xesh says, but carefully and wear protection. EYE protection :roll: