Stripped Crank Thread - Not Pedal Thread 🙁

[Mr Weirdo]

Ride it up the road with the bolt out it will loosen in a 100 yards or so. Stop pedaling immediately.

Thank you GIGFY...I guess best not to do this on a wet day then

 

[non-fixie]

-----

VAR makes/made a tap for the 23.35mm Verot removal thread;
have one in me infirmary

possible they make/made one for the 22.0mm as well...


-----

Pullers for 23mm (Spécialités T.A.) and 23.35mm (Stronglight) are readily available, and a useful addition to any vintage bikewrencher's toolbox.

If you can find a tap in one of those sizes, that would be my preferred solution. Not sure if a 22mm tap will do much good anymore.

 

[Mr Weirdo]

Pullers for 23mm (Spécialités T.A.) and 23.35mm (Stronglight) are readily available, and a useful addition to any vintage bikewrencher's toolbox.

If you can find a tap in one of those sizes, that would be my preferred solution. Not sure if a 22mm tap will do much good anymore.

Handy info thank you

 

[vtwinvince]

Don't beat yourself up, I've done this (more than once).