Hi Guys I know this is not very retro but it is a good steel bike.
Charge Duster large 20” for sale 2008-9 build
Frame , White tange prestige, oversize tubes (not skinny) no dents or cracks and few light scratches but in great condition as it was taped up (Xc’d only)
Fork, Fox 32 RL 130mm travel with lock out. Just serviced new oil seal and crush washers (can be reduced if you want to 110 or 100mm), stansions are perfect lock out works.
Headset, Mpart full sealed cassette bearing
Stem, ITM millennium 90mm
Bars, Specialized riser (680 wide I think)
Grips, DMR
Shifters, Deore 9speed
Front Mech, XTR
Rear Mech, XT
Crank, LX (two rings inner ring will come as a spare)
Pedals, SPD/ Flat
Chain, Connex wipperman silver Lightweight (only done three rides)
Cassette, 11-32 shimano Xt on alloy carrier
Breaks, Deore Hydraulic (160 rotors + 1 set of spare pads recent oil)
Wheels, Mavic Crossland, (seal bearings , light weight but strong, can get UST conversion strips for them)
Tyres, DMR Moto digger (use once, tubes are good but the front has had one puncture repaired)
Seat post, Thompson 440 layback
Seat, Selle x1 perfect condition
Angles with the 130 fork are HA 70 and SA 72. (would be 71/73.5)
Cost me £1000+ to put together. Runs very well. Not used much as I have been out with tendonitis for a long time. Has to go. Looking for £460 posted (UK)
Pic in current set up:
http://lp1.pinkbike.org/p4pb7141377/p4pb7141377.jpg
Day light pic with the old bars and wheels/ seatpost on that are no longer on there. (jsut because its a better pic)
http://lp1.pinkbike.org/p4pb3920882/p4pb3920882.jpg
Any questions please reply or email pete at levy clan dot com
paypal please
Cheers
Pete
Charge Duster large 20” for sale 2008-9 build
Frame , White tange prestige, oversize tubes (not skinny) no dents or cracks and few light scratches but in great condition as it was taped up (Xc’d only)
Fork, Fox 32 RL 130mm travel with lock out. Just serviced new oil seal and crush washers (can be reduced if you want to 110 or 100mm), stansions are perfect lock out works.
Headset, Mpart full sealed cassette bearing
Stem, ITM millennium 90mm
Bars, Specialized riser (680 wide I think)
Grips, DMR
Shifters, Deore 9speed
Front Mech, XTR
Rear Mech, XT
Crank, LX (two rings inner ring will come as a spare)
Pedals, SPD/ Flat
Chain, Connex wipperman silver Lightweight (only done three rides)
Cassette, 11-32 shimano Xt on alloy carrier
Breaks, Deore Hydraulic (160 rotors + 1 set of spare pads recent oil)
Wheels, Mavic Crossland, (seal bearings , light weight but strong, can get UST conversion strips for them)
Tyres, DMR Moto digger (use once, tubes are good but the front has had one puncture repaired)
Seat post, Thompson 440 layback
Seat, Selle x1 perfect condition
Angles with the 130 fork are HA 70 and SA 72. (would be 71/73.5)
Cost me £1000+ to put together. Runs very well. Not used much as I have been out with tendonitis for a long time. Has to go. Looking for £460 posted (UK)
Pic in current set up:
http://lp1.pinkbike.org/p4pb7141377/p4pb7141377.jpg
Day light pic with the old bars and wheels/ seatpost on that are no longer on there. (jsut because its a better pic)
http://lp1.pinkbike.org/p4pb3920882/p4pb3920882.jpg
Any questions please reply or email pete at levy clan dot com
paypal please
Cheers
Pete
