Raleigh Dyna Tech appreciation and information thread

[Mark south wales]

because I'm a dirty sun of a gun and love the music

 

[Sm@alite]

fabulous, any idea on the steerer length> obv 700c 1 1/8 or am I wrong? cheers mark

I've not measured either but I reckon 1 1/8th is right .

 

[baron von greenback]

On the Raleigh dynatech diablo the inner triangle is titanium what is the rest is it aluminium or cromoly the frame and if it's original stem and forks what are they cheers

 

[Markybeau]

On the Raleigh dynatech diablo the inner triangle is titanium what is the rest is it aluminium or cromoly the frame and if it's original stem and forks what are they cheers

If it has a 2125 decal, the 3 main tubes are ti. The rear triangle is chromoly. The bars are ti. The forks and stem are chromoly.
https://www.retrobike.co.uk/gallery...aleigh+SPD+-+Titanium+Mountain+Bikes.pdf.html

 

[baron von greenback]

Ok mate thanks I see if I can see sticker

 

[Mark south wales]

hiya guys, ive never had a road bike, ive been looking at the 600 and 725 on ebay. both 21" frames. im 6foot 1, with a 34 inside leg, would they be to small for me, or do i need to hold out for a bigger frame, like a 23" 58cm?

 

[Mark south wales]

because I'm a dirty sun of a gun and love the music

plan to use this, for a bit of light bikepacking, so just grabbed me a surly trucker, cromo disc canti fork with panier bosses, if i dont like it, ill put them on my mtrax 500, or my 531 atb castorama

 

[Gtpulse]

hiya guys, ive never had a road bike, ive been looking at the 600 and 725 on ebay. both 21" frames. im 6foot 1, with a 34 inside leg, would they be to small for me, or do i need to hold out for a bigger frame, like a 23" 58cm?

I’m 6’2” though have a longer torso, my inside leg is 33”. My Dyna-Tech Pro feels perfect in a 23” frame, stem from memory is slightly longer. In the photo below is about the comfiest I’ve had a bike.

 

[ultrazenith]

If it has a 2125 decal, the 3 main tubes are ti. The rear triangle is chromoly. The bars are ti. The forks and stem are chromoly.
https://www.retrobike.co.uk/gallery...aleigh+SPD+-+Titanium+Mountain+Bikes.pdf.html

The head tube is alumunium, and if it's got UGLI forks, the crown will be aluminium and the legs will be cromo or ti.

 

[Mark south wales]

Snap !
View attachment 973492

hiya is your fork a 1" steer tube or 1 1/8" I haven't got a calipers to measure mine. cheers mark