With the help of Drystonepaul, I'm off to the powder coaters with a couple of frames on Friday 11th September, so I thought I would bundle up some of other parts from the shed and get them done while I'm there for no reason other than... well there's a misplaced economic logic in there somewhere!
Powder coated forks + blue green caps + DMR added to!
- Thread starter Dead Rats
- Start date
- Feedback
- View
Bugger have a frame you could have taken for me too :cry: still all in one piece at the mo so could you let me know who they are and what kind of job they do 
- Feedback
- View
Greenspeed Powder Coating
http://www.gspowdercoating.co.uk
These guys are literally just round the corner from me and I'm becoming a bit of a regular customer.
Dead Rats is dropping in a couple of frames to me tomorrow and they are going in along with another frame from a mate and another one of mine.
They normally charge about £30 for frame and forks including stripping and normal turnaround is about a week to ten days.
The results are very good.
If you want a hand with getting anything to them just PM me.
http://www.gspowdercoating.co.uk
These guys are literally just round the corner from me and I'm becoming a bit of a regular customer.
Dead Rats is dropping in a couple of frames to me tomorrow and they are going in along with another frame from a mate and another one of mine.
They normally charge about £30 for frame and forks including stripping and normal turnaround is about a week to ten days.
The results are very good.
If you want a hand with getting anything to them just PM me.
Finished forks + blue & green stuff + DMR STS roller
As promised here are two pairs of 1" rigid threaded forks, both freshly powder coated gloss white... I'm asking £25 for each pair posted to UK, which is cheap considering they have both been sandblasted and powder coated (by a chap who was thoughtful enough to mask off the crown, threads and brake bosses). Unused since - just been unwrapped to check fantastic finish - pics don't do them justice so I can send more close-ups without flash if you're interested!
LEFT:
Raleigh 1" threaded rigid steel forks
for v-brake or canti (three spring holes)
142mm steerer, top 33mm is threaded
395mm crown race to axle
two sets of eyelets
RIGHT:
beefy 1" threaded rigid steel forks, unsure of brand
for v-brake or canti (three spring holes)
134mm steerer, top 21mm is threaded - ie they've been cut down but carefully
395mm crown race to axle
one set of eyelets
ALSO TO CLEAR:
Full set of 4 unused Hope blue ahead spacers, £7 posted - SOLDEN!
Blue ano QR 31.8mm seatpost clamp - stamped 34mm but it's definitely 31.8mm, £5 posted:
Brand new DMR STS / Chain Reactor PU roller / pulley guide, £6 posted:
pair green ano Schraeder valve caps, £2 posted:
pair blue ano Schraeder valve caps, £2 posted:
As promised here are two pairs of 1" rigid threaded forks, both freshly powder coated gloss white... I'm asking £25 for each pair posted to UK, which is cheap considering they have both been sandblasted and powder coated (by a chap who was thoughtful enough to mask off the crown, threads and brake bosses). Unused since - just been unwrapped to check fantastic finish - pics don't do them justice so I can send more close-ups without flash if you're interested!
LEFT:
Raleigh 1" threaded rigid steel forks
for v-brake or canti (three spring holes)
142mm steerer, top 33mm is threaded
395mm crown race to axle
two sets of eyelets
RIGHT:
beefy 1" threaded rigid steel forks, unsure of brand
for v-brake or canti (three spring holes)
134mm steerer, top 21mm is threaded - ie they've been cut down but carefully
395mm crown race to axle
one set of eyelets
ALSO TO CLEAR:
Full set of 4 unused Hope blue ahead spacers, £7 posted - SOLDEN!
Blue ano QR 31.8mm seatpost clamp - stamped 34mm but it's definitely 31.8mm, £5 posted:
Brand new DMR STS / Chain Reactor PU roller / pulley guide, £6 posted:
pair green ano Schraeder valve caps, £2 posted:
pair blue ano Schraeder valve caps, £2 posted:
jez-4-bikes-max
Kona Fan
- Feedback
- View
Fancy powder coating a pair of P2s for me?
Similar threads
