Kona Explosif 1992 refurb

jonthefish

Senior Retro Guru
Feedback
View
Time has come to give my Explosif Pro a wee tidy up. It was bought as frame and fork, built up with an odd mix of bits and gets ridden plenty. Would have liked to go full Suntour XC Pro but as that isn't so easy to find and I have some XT735/730 bits I will go that route (mostly).
It won't be one for the purist :|

Pics as it was:
 

Attachments

  • Melgarve spring 2017c.webp
    Melgarve spring 2017c.webp
    1.2 MB · Views: 881
  • P6281834.webp
    P6281834.webp
    456.2 KB · Views: 881
Re:

The lower half of the Impact headset is pitted and rough. Lower half of an STX headset out of box of bits seems the right height. Silver rather than black but it will be hidden by the rubber 'boot', which is important for originality and for the retention of grit and cow crap.
 

Attachments

  • P3083764.webp
    P3083764.webp
    82 KB · Views: 871
  • P3083762.webp
    P3083762.webp
    97.4 KB · Views: 871
Nice bike u have there
The black looks smart.
I’ve the same frame with paint that was past it so got it redone
 

Attachments

  • 0B2EBB99-F5EE-4709-9108-FAD9B08EF811.webp
    0B2EBB99-F5EE-4709-9108-FAD9B08EF811.webp
    303.4 KB · Views: 870
Yes
Built back up and out on it as n when time
Couldn’t find the pics of it built up to many on the phone lol
 
Re:

BB fitted. Tange Seiki 7922. Light weight and supposed to be good quality (fingers crossed).
Cranks on - M730.
Headset fully fitted and forks on. Definitely smoother without lower half of the Impact headset. Time for beer and fodder.
 

Attachments

  • Cranks.webp
    Cranks.webp
    83.5 KB · Views: 845
  • P3083762 (2).webp
    P3083762 (2).webp
    92.2 KB · Views: 845
Re:

Hubs: XT M730/M732. I won't polish these as logos are already vanishing and then I'll forget what the hell they are. Patina and wrecked logos will match the frame so entirely in keeping. And they run nice and smooth : )

Rims: Ritchey Vantage Comp in nice condition with faded logos. In keeping with not dressing mutton like lamb.
 

Attachments

  • P3103771.webp
    P3103771.webp
    45.9 KB · Views: 724
  • P3103768.webp
    P3103768.webp
    103 KB · Views: 724
Re:

Bar and stem on. Logos a bit rough but I don't look quite as I did 28 years ago either so they'll do fine. Bit of rust treatment needed on fasteners and cable guide.

XT M735 mechs tidied up but not polished, lubed and fitted.

OK from 15 feet.
 

Attachments

  • P3263816.webp
    P3263816.webp
    76 KB · Views: 495
  • P3263817.webp
    P3263817.webp
    88.1 KB · Views: 495
  • P3263819.webp
    P3263819.webp
    54.9 KB · Views: 495
Re:

Good idea giving it a spring clean :)
Handy tip about the lower headset too, headset on my '91 explosif is headed the same way I think :?
M730 looks good, silver and black is a classic combo.
 
Can claim no credit re the headset - I got the idea somewhere here on Retrobike. Fine though - keeps the look and adjustability of the original.
 
Back
Top