FS: f&f&bits Kona Humuhumunukunukuapua'a

[neuroportal]

17.5" frame center to top of seat post (I think - will double check later).

Can be used as it is but would benefit from a new coat. The forks are 1" Proj 2.

There is a headset on the frame, a no name which works but feels a little rough.

Want £80 plus postage. Would so prefer a pickup but if you wish to pay Parcel force yourself then I will package up well.

The rear wheel is also up for grabs, tis a Rudd hub in a weinman rim. Braking surface is used but all in all ok. £30 posted? Will include the freewheel. (18 tooth IIRC)

The Syncros Stem is a 1" quill, has the hinged front and is in fair condition. Logo fine on both sides. Not sure what to ask for this so will start at £25 posted.


Sorry no other pics than this one at the moment...

 

[KeepItSteel]

any dents?

 

[DM]

It's a 1995, like mine, so the stem and fork will be 1+1/8.

It would be sensible for the buyer to go for the rear wheel, too, as the rear spacing on these is different to a MTB.

Mine is 120mm, but some people seem to have the "other" track/BMX spacing on theirs = 110mm/112mm.

[/Humu geekness]

Humus & A'has rule!

 

[neuroportal]

No Dents.

As for the head dia - will check in the morning but im postivie it is 1".

It is 120mm rear spacing. The bmx hub I spaced out with washers since it was a tad over 110mm, but the spindle is not ideal for the dish and I cannot figure out how to get off the existing bearings (sealed units) off the spindle.

For those that dont know - a track hub is 120mm - so any wheel with that will fit.

Have to say that it is a really nice ride! the long wheel base really works on a hardtail/no - suspension setup.

Ta for all your interest. I would keep if I had the cash and didnt want a SS/fixed CX bike.

 

[neuroportal]

My Bad.

Reason i was convinced it was 1" was the seal that had been pushed into the headset!

tis 11/8"

Geometry is 18" from c-top and 22.5" c-c top tube.

 

[neuroportal]

weekend bump

 

[neuroportal]

bump.