Anyone know the outer diameter of hope disc rotor rivets?

[synchronicity]

Anyone happen to know the outer diameter of hope disc brake rotor rivets?

 

[sam_white]

For the floating rotors?

 

[muddytreker]

Floating Hope Rotor outside Rivot OD ( as pictured ) there is of course and inside portion of the rivot,
which is the pressed side, no pic you want one ?
Some folk get terminology mixed up, so in case its the mount bolt heads ? ( see pics )

 

[synchronicity]

Yes for floating rotors...

But no that's what I meant. That's the outside flange diameter.
I need the shaft diameter of the floating rivets.
Not the inner diameter of the rivet hole either.

 

[muddytreker]

A tricky size to accurately measure unless you have a retired floating rotor to perhaps
disassemble as both rivot flanges cover the core, will have another look later see if maybe
a feeler guage can get in the expansion gap, will let you know.

Maybe check tech section on hopetech website see if any info there, or perhaps call hope.

 

[muddytreker]

Hope 180mm Floating Disc Rotor, MTB.
Used a strand of copper wire to fit into the expansion gap, approx 4mm in both
sides from the flange outer, knowing the [email protected] and OD@16mm my best
reckon is 8mm.

 

[muddytreker]

Whats yah reason for this ? some project you wanna use the rivot types on ?