For Sale Adapterplate for 22mm Hayes to Flatmount

[Mr. Orange]

@andyfettes ; send you a PM.

Nice bike!

 

[tckx049]

Hi,

I am interested in one of these adapters. Currently converting a '99 Klein to a gravel bike.

Thanks much, Tom.

 

[Mr. Orange]

Hi,

I am interested in one of these adapters. Currently converting a '99 Klein to a gravel bike.

Thanks much, Tom.

I'll send you a PM for details.

 

[andyfettes]

I finally got round to having Mr Orange’s adapter fitted to my 2001 Klein Attitude Comp and it’s working great!

Used a M9000 XTR flat mount caliper and an Elvedes 15378 flat mount adapter to raise it up a few mm to work with the 180mm XTR RT-MT905 rotor

Routed the hydraulic line through the top tube internal routing and cable tied to the seatstay which was the neatest way we could find

It’s all working perfectly and I can finally ditch the old pressed steel adapter I’ve been struggling with for 10 years!

Massive thanks to @Mr. Orange for all your help!

 

[Mr. Orange]

@andyfettes Nice work, very cool bike, As far as I can see from the picture.
No thanks for the assistance; my pleasure.

Glad to hear that the adapterplate works good.

 

[Mr. Orange]

For other interested people; I have a small new batch adapterplates made and available.

 

[andyfettes]

@andyfettes Nice work, very cool bike, As far as I can see from the picture.
No thanks for the assistance; my pleasure.

Glad to hear that the adapterplate works good.

Here is a picture of the whole bike with the new brakes!

Finally got it down under 10kg after removing the old steel adapter which was over 200g on its own.. 9.85Kg now!

 

[lawson]

Can I have one please? Pm sent also...

 

[Mr. Orange]

@andyfettes ; Awesome bike!

 

[captainwaleck]

Hi there!
In another thread I already mentioned that I have some discbrake adapters for sale to fit on a few types of bike frames from the end 90's to early 00's.
Only a few years Brands like Trek, Gary Fisher, Klein and perhaps a few others, made their frames to fit 22mm chainstay discbrakes of Hayes. The so called 'parallel mount'. This standard only lived for a few years, till the nowadays mounting stds, like flat- and postmount came up.
These frames however, are still alive and kicking.
Myself I own a 1999 GF Mt Tam, which I may upgrade to discbrakes in the future, but is nowadays still running wild with Magura rim brakes. First I am doing a project to create Gravel bike based on a vintage Trek sl mtb frame also prepared with the rare discbrake mounts. So I had to have discbrake adapters to fit some nice Hope flatmounts. Since laser uiting multiple precies is much cheaper then Just 1 or 2, I had made more and are some left for sale...
Lightweight, made of aluminum. They can go for 15 euro's each and shipping costs.
See picture below. Let me know if your interested. I'm based in NL, so please consider that in case of shipping.
Kind regards,

Mr. Orange

Hey Mr Orange, I'll take one of these! Whats the best way to place an order?