Wanted 3x7 (or 8) shifters

[fiveSixteenths]

Anyone have a pair they’re looking to move on?

 

[pigman]

Downtube or brifter?
friction or indexed?
campag or shimano?

 

[fiveSixteenths]

All excellent questions
Post in haste, edit later in shame
Brifters
Indexed
Shimano
I thank you…

 

[hamster]

There is only a single 7s brifter type, which are RX100.
Alternatively early Sora existed in 7s, but with the Campag ergo-style thumb lever on the inside.

I believe Microshift do some now, not sure if there is a triple option.

 

[fiveSixteenths]

There is only a single 7s brifter type, which are RX100.
Alternatively early Sora existed in 7s, but with the Campag ergo-style thumb lever on the inside.

I believe Microshift do some now, not sure if there is a triple option.

It’s for a super-low-budget commuter build so happy for less than NOS condition

 

[Takingabreak]

There is only a single 7s brifter type, which are RX100.
Alternatively early Sora existed in 7s, but with the Campag ergo-style thumb lever on the inside.

I believe Microshift do some now, not sure if there is a triple option.

There are a couple of options available new from SJS if the budget will stretch that far

https://www.sjscycles.co.uk/gear-shifters/shimano-st2303-8-speed-triple-road-sti-levers/
https://www.sjscycles.co.uk/gear-shifters/shimano-tourney-sta073-7-speed-triple-road-sti-levers/
EDIT - Sprockets UK have the tourney ones at a lesser price of £75

 

[fiveSixteenths]

There are a couple of options available new from SJS if the budget will stretch that far

https://www.sjscycles.co.uk/gear-shifters/shimano-st2303-8-speed-triple-road-sti-levers/
https://www.sjscycles.co.uk/gear-shifters/shimano-tourney-sta073-7-speed-triple-road-sti-levers/
EDIT - Sprockets UK have the tourney ones at a lesser price of £75

Yikes! Bit too pricey for a student runabout lock up and leave build, but appreciate the pointers : )

 

[M_Chavez]

I've got 9x3 Micronew if that's of interest.

 

[hamster]

Yikes! Bit too pricey for a student runabout lock up and leave build, but appreciate the pointers : )

Simplest is a set of bar-end shifters, any old ones and simply select friction. The amount of pull per click in 7s is sufficiently big that it generally shifts cleanly.

I had forgotten about the Tourney ones. The Claris 8s are reportedly pretty good, although triples are rare.

A full Campag 8s shifter andrear mech will work fine too, the cog spacing on Campag 8 is identical to Shimano 7.

Another alternative is Campag 9s (pre-2001), and run a hubbub-cable routing Shimano rear mech. (If you don't understand what I am going on about have a Google of 'shimergo') or look at the Cycling UK Shimergo pages.

 

[bhill22]

https://www.retrobike.co.uk/threads/ultegra-shifters-6510.447752/