1992 Rocky Mountain Titanium

losvizzero":17pnkdik said:
I meant the seatpost ;-)
ah okay. may give it a try again at a later date. i still have a few black Syncros posts kicking around spare if i change my mind. but for now i'm kind of settled on the ti post. especially since i now have the ti bar on the bike too.
 
I would leave the Ti seatpost. Maybe a black one would look a tiny bit better. But the coolness factor of the Ti post is soo much higher.
 
zonoskar":2ufzhthz said:
I would leave the Ti seatpost. Maybe a black one would look a tiny bit better. But the coolness factor of the Ti post is soo much higher.
my thoughts exactly, hence why i keep going back to the ti post instead of black.

Mr.Toad":2ufzhthz said:
That bike is a thing of beauty, a dream ride there RM!
A+ for your efforts!
thx! :D
 
i think it's the ring colour, and perhaps the size as well. it was a compromise with the ring selection on the compact set as i had one complete silver and one complete black chainring set to share between the compact Revolutions on this build, and the Forged cranks on the Experience. neither i thought looked good with a complete set of black rings so a split them up between the two. now with this chainset on this bike, it's time to revisit my RM Experience. ;)
 
Re:

Thought I'd give a go at creating a tubing decal for the Titanium. Not much to go on as most of the Titaniums I've seen photos of online, and the three I've owned didn't have one. Only one photo example I've come across is very vague. But you can kind of make out that the wording on it might be the same as the tubing decal on the later Ti-bolt. From these two images, I've made a guestimate and come up with an approximation. 8)

If anyone has any better pics of the original tubing decal on a RM Titanium, I'd appreciate it. ;)
 

Attachments

  • RM-Titanium.webp
    RM-Titanium.webp
    52.3 KB · Views: 807
  • tibolt4.webp
    tibolt4.webp
    40.8 KB · Views: 807
  • 4502257361_8507522915_o.webp
    4502257361_8507522915_o.webp
    56.7 KB · Views: 807
Re:

Are these the pics you wanted? not sure how good you need them or if it's just to check angles...

Mine is a 1991 but prob the same...
 

Attachments

  • image.webp
    image.webp
    16.2 KB · Views: 796
  • image_1.webp
    image_1.webp
    25.2 KB · Views: 796
:D
 

Attachments

  • DSC00652.webp
    DSC00652.webp
    17.1 KB · Views: 602
  • DSC00677.webp
    DSC00677.webp
    20.6 KB · Views: 602
  • DSC00681.webp
    DSC00681.webp
    23.7 KB · Views: 602
Back
Top