Hairylegs66
Devout Dirtbag
Up for sale is my 1991 GT Karakoram.
With the exception of the ti handlebars, Onza ti bar ends and Syncros seat post, all the components on this frame were replaced with new or new old stock items.
I built this up to ride and not to hang on the wall, hence the upgraded components over a standard Inferno.
I’m selling the Karakoram to raise some money towards an e-bike for my elder brother, his need for an e-bike is greater than my need to keep this.
I won’t split the bike for parts so please don’t ask for dibs on them. I’m unable to post the bike so it is collection only, I live in West Essex, not far from the M25.
Build thread is here:- https://www.retrobike.co.uk/threads/1991-gt-karakoram-project-xt-dx-onza-ritchey-rebuild.314303/
I am looking to achieve £600 or very near offers.
Thanks for looking.
Frame: 1991 GT Karakoram Inferno - Triple Triangle, Tange Cro-Moly tubes, size: 20”. Transfers all intact. No dents, a few minor touched in paint chips but otherwise in excellent unfaded condition.
Fork: GT Triple Trak Cro-Moly
Headset: 1 1/8” threaded Shimano DX M650, GT alloy locking lockring
Stem: GT Cro-Moly
Handlebar: Litespeed Titanium 600mm wide, 25.4mm diameter
Grips: Onza Porcipaws
Barends: Onza Titanium with Onza rubber boots, bolts and end caps.
Brakes: Front – Shimano DX BR650 low profile cantilevers
Rear:- Shimano DX BR MT63 U Brake with Power Plate and Shark Tooth anti-jam.
Brake Pads: Shimano DX
Brake Cables: Shimano stainless steel
Cantilever cable hangers: Shimano
Brake Levers: Shimano MO92 Servo Wave (2 finger)
Shifters: Shimano STI MO92 Rapidfire Plus
Front Derailleur: Shimano DX FD650 (26.8 mm, bottom pull)
Rear Derailleur: Shimano DX RD650 long cage
Derailleur Cables: Shimano stainless steel
Cassette: Shimano HG70 (13 – 30)
Chain: Shimano HG70 with KMC quick link
Chainset & cranks: Shimano MT60, 175mm
Crank Bolts: Shimano DXCrank Bolt covers:– custom machined aluminium
Chainrings: 46t Shimano SG, 36t Onza Buzzsaw stainless steel, 26t Onza Buzzsaw stainless steel
Chainring bolts: Stronglight stainless steel
Bottom Bracket: Shimano UN55 cartridge (122.5 x 73)
Pedals: Shimano: DX PD MT60
Hub Skewers: Shimano XT M730/M732 quick release
Rims: Ritchey Vantage Competition
Hubs: Shimano XT M730/M732 36 hole
Spokes: 14 gauge stainless steel
Tyres: Rear - Panaracer Smoke Classic 26 x 2.1”, Front – Panaracer Dart Classic 26 x 2.1”
Wheels were hand built by Momentum Cycles in Brentwood.
Saddle: Selle Italia Flite 1990 (titanium rails)
Seatpost: Syncros Hardcore alloy 26.4mm, 450mm long
Seatpost quick release lever: Shimano XT M730
With the exception of the ti handlebars, Onza ti bar ends and Syncros seat post, all the components on this frame were replaced with new or new old stock items.
I built this up to ride and not to hang on the wall, hence the upgraded components over a standard Inferno.
I’m selling the Karakoram to raise some money towards an e-bike for my elder brother, his need for an e-bike is greater than my need to keep this.
I won’t split the bike for parts so please don’t ask for dibs on them. I’m unable to post the bike so it is collection only, I live in West Essex, not far from the M25.
Build thread is here:- https://www.retrobike.co.uk/threads/1991-gt-karakoram-project-xt-dx-onza-ritchey-rebuild.314303/
I am looking to achieve £600 or very near offers.
Thanks for looking.
Frame: 1991 GT Karakoram Inferno - Triple Triangle, Tange Cro-Moly tubes, size: 20”. Transfers all intact. No dents, a few minor touched in paint chips but otherwise in excellent unfaded condition.
Fork: GT Triple Trak Cro-Moly
Headset: 1 1/8” threaded Shimano DX M650, GT alloy locking lockring
Stem: GT Cro-Moly
Handlebar: Litespeed Titanium 600mm wide, 25.4mm diameter
Grips: Onza Porcipaws
Barends: Onza Titanium with Onza rubber boots, bolts and end caps.
Brakes: Front – Shimano DX BR650 low profile cantilevers
Rear:- Shimano DX BR MT63 U Brake with Power Plate and Shark Tooth anti-jam.
Brake Pads: Shimano DX
Brake Cables: Shimano stainless steel
Cantilever cable hangers: Shimano
Brake Levers: Shimano MO92 Servo Wave (2 finger)
Shifters: Shimano STI MO92 Rapidfire Plus
Front Derailleur: Shimano DX FD650 (26.8 mm, bottom pull)
Rear Derailleur: Shimano DX RD650 long cage
Derailleur Cables: Shimano stainless steel
Cassette: Shimano HG70 (13 – 30)
Chain: Shimano HG70 with KMC quick link
Chainset & cranks: Shimano MT60, 175mm
Crank Bolts: Shimano DXCrank Bolt covers:– custom machined aluminium
Chainrings: 46t Shimano SG, 36t Onza Buzzsaw stainless steel, 26t Onza Buzzsaw stainless steel
Chainring bolts: Stronglight stainless steel
Bottom Bracket: Shimano UN55 cartridge (122.5 x 73)
Pedals: Shimano: DX PD MT60
Hub Skewers: Shimano XT M730/M732 quick release
Rims: Ritchey Vantage Competition
Hubs: Shimano XT M730/M732 36 hole
Spokes: 14 gauge stainless steel
Tyres: Rear - Panaracer Smoke Classic 26 x 2.1”, Front – Panaracer Dart Classic 26 x 2.1”
Wheels were hand built by Momentum Cycles in Brentwood.
Saddle: Selle Italia Flite 1990 (titanium rails)
Seatpost: Syncros Hardcore alloy 26.4mm, 450mm long
Seatpost quick release lever: Shimano XT M730
