Recent content by ishaw

You could try using a wheel qr through the axle if it's hollow to help hold the washer in place? It's a thought that just occurred to me, as I use the bolt and washer method.

These on eBay seem cheap and fit your criteria. https://www.ebay.co.uk/itm/197278045581?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=bQeRwX_fS5W&sssrc=4429486&ssuid=GeEG02BlRb2&var=&widget_ver=artemis&media=COPY I'm tempted myself for a project I'm doing for a friend but it's 27.5 and while...

If it helps, I have lots of 1 inch spacers which are quite fat and help with the aesthetics of running a shimmer stem. Silver or black in the stash. May also have quite a long shim somewhere.

Not wanting to jump the queue but I could be interested in the forks for my dyantech if the op doesn't. Mine is blue themed so would match everything a treat.

I had a quick drunken rummage, this was near the top of my bar stash. 650mm long. High rise. Black. A couple of marks that won't be hidden by controls and grips, but very tidy really. 31.8 clamp at stem.

I've done this a few times on a GT sts and a Klein. My technique involves a cost hanger. Unwind the hook and straighten it all out. Bend it to shape that will allow you to push it through one end of the frame, and patience to get it to come through the other side. The cost hanger is almost...

I have a sid that I don't have a use for. What are you looking for exactly? The forks I have seems to be pretty decent. It's minus decals and black, came on a bike I bought for the frame.

Should have a few options, what width?

Need to check what travel I have on options. Assume you want 1 1/8 steerer and qr?

What sort of spec/budget?

Isn't that just a riser bar? What clamp diameter are you after?

I'd apply some of the kurust stuff that treats the rust and prevents further rusting too.

Some people shouldn't be allowed to lay their ham fisted hands on bikes. If it were mine, I'd remove the other half of the broken seat clamp very sympathetically, then see what was left in relation to the seat tube I'd then look at filing the top of the seat post as flat as possible without...

I've got this triple that would bolt straight on to your BB

Ht2 bvs work with 68 or 73mm shells, just uses spacers so pretty universal. 104bce rings are plentiful.as have been the standard for many years now, I doubt the supply will run out any time soon. I'm sure you could pick up a new set of cranks, as mentioned, deore and upwards are decent, as are...