Dynatech seatpost slipping ?!

LittleSkink

Retro Guru
Ok got my old '95 Dynatech Diabolo frame (Half Ti half CrMo) all built up as single speeder and went for a proving run last night - all is well but seat post isnt staying put

It is a 27.0 Xlite post and afaik the frame is a 27.0 fit. Tightened the seatpost bolt as much as I dare and it is bending the bracket on the frame slightly - not sure what to try next . . . help please
 
tiny bit of grease yes - so the alloy post doesnt sieze in the steel frame

wondering if this is common / uncommon on these Dynatech frames or even XLite posts ? I know Thomson posts had a reputation for being slightly undersized

EDIT - okay removed grease with Meths from the inch or so at the top of the tube where clamp is, left some grease lower down. Cleaned grease from top of frame tube also. The clamp bolt was a little snug so (and ungreased) so cleaned and greased that to make it smoother

definitely still slipping, even when I tighten as tight as I dare
 
grip paste, the stuff they recommend for CF to CF joints.
Could try tooth paste as a try it and see first (very similar effect, but washes away in the rain!).

Unless the pin is actually undersized, or a previous owner has stretched the top of the seat tube
 
LittleSkink":2ic5wasx said:
Ok got my old '95 Dynatech Diabolo frame (Half Ti half CrMo) all built up as single speeder and went for a proving run last night - all is well but seat post isnt staying put

It is a 27.0 Xlite post and afaik the frame is a 27.0 fit. Tightened the seatpost bolt as much as I dare and it is bending the bracket on the frame slightly - not sure what to try next . . . help please


Had the same with mine and I think the dynatech post is 26.8mm and the frame is 27.2 and there was supposed to be a shim in there. I put in a 27.2 and it was fine but I never did find the right shim. (Sold now).
 
quick update, just had a play with a 27.2 off one of my kids bikes

needed to bend the clamp bolt open a little with screwdriver but 27.2 will go in, snug as you like but goes in about 3" ok

looks like I need a new post . . . bugger . . . anyone know where I can get a nice one cheap? Whats the going rate for a nice condition 27.0 Xlite?
 
LittleSkink":3sc7glox said:
quick update, just had a play with a 27.2 off one of my kids bikes

needed to bend the clamp bolt open a little with screwdriver but 27.2 will go in, snug as you like but goes in about 3" ok

looks like I need a new post . . . bugger . . . anyone know where I can get a nice one cheap? Whats the going rate for a nice condition 27.0 Xlite?
Was looking for 27.0 seatposts also and didn't fancy spending lots of £££'s on a metal tube :LOL:. See my post here as I found a couple of nice, light seatposts cheaply on ebay (links in the thread). I think those sellers have different colour options too if you look at their other items.

Hope this helps!
 
Back
Top