sorry si, meant which disc callipers.
the domed bit thats causing the issues has a small flat section. if this is 1 or 2mm then the hope spacers should work. the only issues i can foresee are the hole in the spacers may not fit over the domed bit, and it may push the disc too far towards the frame. this is why i asked what callipers you were going to be using, something like avid's should be ok as you can move the calliper body laterally on the mounts.
the domed bit thats causing the issues has a small flat section. if this is 1 or 2mm then the hope spacers should work. the only issues i can foresee are the hole in the spacers may not fit over the domed bit, and it may push the disc too far towards the frame. this is why i asked what callipers you were going to be using, something like avid's should be ok as you can move the calliper body laterally on the mounts.