Sold XT M732 Hubs + 7speed Cassette Job lot

[dablk]

Getting to the end of the Marin project parts... yes I can actually see work bench again.

1x Front hub
2x Rear Hubs, the complete is 135mm. The incomplete you might see is narrower so assume 130mm. However all axels which came with it were 135mm sized. aside from bearings I believe there is enough there to rebuild it however I'm not sure how many spacers were needed with the hub running the wrong axel.

7 speed Cassette. Not sure on kit level.




£30 Delivered for everything

 

[foz]

32 or 36 hole please?

 

[dablk]

Hi @foz … all 32

 

[27motorhead]

Good price for hubs you can build up or have as spares... You can never have enough spares at times!

 

[dablk]

Can throw in 1 set of skewers

 

[foz]

tempting.... what are the cups and cones like?

 

[dablk]

Not had the main two apart. Front has a tiny gravely bit. Rear seems really smooth.

On the dismantled one there is a bit of visibly pitting.

One of the rear spare axles was brand new.

From memory I got the front and the dismantled rear. Started cleaning it up. Decided on a new axel as saw one cheap. Then realised the damn thing hub wasn’t 135 even if the axel was. So sourced the 2nd 135 hub.

 

[Tootyred]

Looks like the rear in bits has an 8 speed 5mm longer freehub on it (theres no thread for backwards compatibility). That would make it 135mm total....its a conversion i do with old 130mm xt hubs.

 

[27motorhead]

Chris, I'll take these off your hands please. Will drop you a PM!