Wanted, rigid forks 1 1/8th unthreaded

[James]

i really cant find any rigid forks for my ss build that meet my criteria.

need to have a 1 1/8 unthreaded steerer at about the 200mm mark.
and v brake compat preferably with an axle to crown 425mm+

any unbranded ones will do, this aint a weight weenie expensive build.
cheaper the better.

i dont ride hard so they dont have to be bombproof theyd be for light street trials and a bit of xc.

thanks in advance, james.

 

[orange71]

i really cant find any rigid forks for my ss build that meet my criteria.

need to have a 1 1/8 unthreaded steerer at about the 200mm mark.
and v brake compat preferably with an axle to crown 425mm+

any unbranded ones will do, this aint a weight weenie expensive build.
cheaper the better.

i dont ride hard so they dont have to be bombproof theyd be for light street trials and a bit of xc.

thanks in advance, james.

got some Onza Tuff Guys, plenty of steerer, v-brake or disk. Look like this, but not with magura mount, but a std v mount. £20 posted?

 

[James]

thanks for the offer but i have looked at tuf guys and they have a pretty low axle to crown height which wouldnt work with my bike's geometry. probably as they were designed as low sharp trials forks.

sorry about that

 

[orange71]

no probs good luck

 

[JeRkY]

Ive just been pondering some of these after finding them in another thread.

http://superstar.tibolts.co.uk/product_ ... cts_id=101{10}69

possibly get them and then some of the pace RC31 V brake mounts that appear on ebay fairly often.

 

[James]

i would love to but this build is really just a bit of a hack bike that doesnt warrant carbon forks! £80 is about the cost of everything else on it.
thanks for the recommendation though. they are really good value for carbons.

 

[JeRkY]

hehe sorry yes, i seem to have missed the "cheap non weanie" part of your post...my bad

 

[South Bound]

Nooo, do it, spend the money...

Just like this! (Just an excuse to put my garden in another thread!)

 

[James]

any other offers?

 

[James]

bump due to a deal falling through on southerndownhill forums, should never have left the safety of retrobike!