I have two sets of early Shimano High Flange hubs for sale.
These have been sitting stored and were all rebuilt with new bearings a couple of years back and were then put away but never built up since. All run very smoothly and all threads and spoke holes are in great condition.
Any questions just message and I will do my best to answer asap.
Prices include postage for UK it will be Royal Mail 48 signed for , outside UK, at cost.
Thanks
Jamie +
1st generation Dura Ace High Flange
Rear 120mm
Front 100mm
Both have had recent new Shimano bearings and when cleaned were very clean and unscored on the races. New bearings and grease and run smoothly. I also have two front spare bearing covers included. (see pics) No Dura Ace Skewers unfortunately, though the Shimano QR skewers on the standard hubs below will come with the Dura Ace hubs.
£70 £50
Untitled by Jamie Dyer, on Flickr
Untitled by Jamie Dyer, on Flickr
Untitled by Jamie Dyer, on Flickr
Untitled by Jamie Dyer, on Flickr
Untitled by Jamie Dyer, on Flickr
Untitled by Jamie Dyer, on Flickr
Untitled by Jamie Dyer, on Flickr
Shimano High Flange hubs
Rear 120mm
Front 100mm
As with the Dura Ace above these have had new bearing s and grease and run very smoothly. Threads are good and clean, as are the spoke holes.
No QR skewers as those in the photo are for the Dura Ace hubs.
£25 delivered
by Jamie Dyer, on Flickr
by Jamie Dyer, on Flickr
by Jamie Dyer, on Flickr
Untitled by Jamie Dyer, on Flickr
by Jamie Dyer, on Flickr
by Jamie Dyer, on Flickr
These have been sitting stored and were all rebuilt with new bearings a couple of years back and were then put away but never built up since. All run very smoothly and all threads and spoke holes are in great condition.
Any questions just message and I will do my best to answer asap.
Prices include postage for UK it will be Royal Mail 48 signed for , outside UK, at cost.
Thanks
Jamie +
1st generation Dura Ace High Flange
Rear 120mm
Front 100mm
Both have had recent new Shimano bearings and when cleaned were very clean and unscored on the races. New bearings and grease and run smoothly. I also have two front spare bearing covers included. (see pics) No Dura Ace Skewers unfortunately, though the Shimano QR skewers on the standard hubs below will come with the Dura Ace hubs.
Untitled by Jamie Dyer, on Flickr
Untitled by Jamie Dyer, on Flickr
Untitled by Jamie Dyer, on Flickr
Untitled by Jamie Dyer, on Flickr
Untitled by Jamie Dyer, on Flickr
Untitled by Jamie Dyer, on Flickr
Untitled by Jamie Dyer, on FlickrShimano High Flange hubs
Rear 120mm
Front 100mm
As with the Dura Ace above these have had new bearing s and grease and run very smoothly. Threads are good and clean, as are the spoke holes.
No QR skewers as those in the photo are for the Dura Ace hubs.
£25 delivered
by Jamie Dyer, on Flickr
by Jamie Dyer, on Flickr
by Jamie Dyer, on Flickr
Untitled by Jamie Dyer, on Flickr
by Jamie Dyer, on Flickr
by Jamie Dyer, on Flickr
Last edited:
