Seat post angle shim? 🤔

[thom04]

Does such a thing exist?

I'm fettling around with my set up & want to try a slight nose down saddle position to see if that's any more comfortable for longer rides. My current post has run out of travel in that direction.

It's an ITM Flat post (image grabbed from an eBay listing). It's already got a little DIY shim in there made from a beer can that I used to get the saddle perfectly flat, but I'm thinking there must be a more elegant solution.

Ideally I don't want to get a new post, but realise that might be the easiest win here

 

[Splatter Paint]

I’m confused…. Can you upload a photo of your set-up?

 

[benjabbi]

Can you file the back of the slot the bolt passes through a bit to give a bit more adjustment?

 

[thom04]

I’m confused…. Can you upload a photo of your set-up?

No worries, I'll grab a photo later when I venture out to the shed

 

[thom04]

Can you file the back of the slot the bolt passes through a bit to give a bit more adjustment?

good idea I don't think there's loads of material back there, but I can't imagine a couple of mm will hurt.

Got me thinking that the bottom 5mm or so of the bolt doesn't engage with anything so I could probably shave some width from the bolt as well