Rock Shox Mag 10 £40

taffy

Old School Grand Master
Feedback
View
Purchased here in the last week for a project and for various reasons i'm going form something else ><

In excellent condition a few marks but otherwise very tidy
allen bolt crown, brace with canti hanger in VGC et etc.


Long threaded steerer - 185mm long
1-1/8th headset size.

(there was an issue with the threads being slightly tight this has been sorted though alloy headset 's may be tight)

mag10.jpg



£40 posted
 
hello... of the steerer length how much of it is threaded? I'm thinking of these for a canti-braked Fisher with a very short headtube, so am considering lopping off the threads and using an aheadset & stem :? Not sure if this is wise but pretty sure I'll be able to bash a star nut in there once cut - cheers, Al :)
 
DeadRats, if this is a threaded steerer originally, I think it may well be externally machined away on the section below the thread (to reduce weight) so you cannot use anything below the bottom of the threads.

I cannot tell form the picture though but it hints at it.
A 170mm steerer (uncut) is threaded from 120mm
So best guess is a 200mm steerer (uncut, which 185 lies in ) is threaded from 150mm
So there will be 35mm of threads
 
FluffyChicken":2fksa1p2 said:
rojo":2fksa1p2 said:
I sm after a crown steerer if you split . :wink:

These would be perfect for a 150mm Kona with an Impact headset. Almost as if they are cut for it.

could I swap this crown / steerer on to he judys??
 
Back
Top