Onza HOs again

[kaiser]

Quick question. I have the assembly pdf and have assembled them so. Is it correct that the springs do not react in the normal fashion? As in against the holes at the canti mounts but rely on the fit of the spring tension adjuster on the canti mounts?

 

[Defiant]

correct,...but you build up the tention by turning the base,..

 

[kaiser]

correct,...but you build up the tention by turning the base,..

Cheers

 

[Xesh]

correct,...but you build up the tention by turning the base,..

But don't go too far. I've known the springs to snap if you tension them too much. Also don't over tighten the bolt holding the brake pad assembly to the arm otherwise the bracket will crack.