Need some help, Alpinestars stem

[defrost]

Looking for a shorter stem, mine is 110mm 28,6 quill
My seeting position is way forward, like to have a more comfortable ride.
I don’t want to change the look of the bike too much (no bmx style)
What is my options? It must be alu or som anodized color

 

[Pllacebo99]

Alpinestars used 1 1/4” stems so your options will be somewhat limited.
110mm is probably about right by retro bike standards
120mm and 130mm was deffinetly a thing and so was 0 degree rise.

Catalogue spec shows AS Mlite Cro Mo as the stock stem. (With cable guide)

Try 100mm see if it suits you better, anything shorter would look out of place.

Answer ATAC quill stem would be a nice touch!

 

[defrost]

I mesured the stem and its 28,6mm it

 

[Pllacebo99]

Correct, the size will also be stamped on the quill of the stem

 

[Markybeau]

I'm pretty sure that's not a standard Alpinestars stem in the photo, as they had an unusual clamp gap for their own brand handlebar. Which meant if you wanted a different bar you needed a shim or to change the stem as well.

Are you sure it's the reach that's the problem, or do you need a stem with a steeper angle? Like, say 10 or 15° lift.