Hi I have some frames for sale
Firstly is a mauricio sannino Columbus genius steel road frame
Seat tube is 58cm (centre to top)
Top tube is 55.5cm
Head tube is 15cm
It takes a 1inch fork and a 27.2mm seatpost, Italian threaded bottom bracket and a rear spacing of 130mm
It's very light weighing 1.67kg for a 58cm frame. Genius tubing is up there with the best steel framesets. Mauricio Sannino is a famous Italian frame builder who has supplied frames for the U.S.S.R national track team. Very nice frame, it has horizontal drop outs so could be built as a fixed wheel or single speed bike but also has a derailleur hanger for gears as well. Frame is in very good condition
£200.posted (Frame only)
Also I have a Lemond Buenos Aires frame and fork.
It's a combination of oclv carbon fibre and true temper ox platinum steel. The oclv is the same as the carbon fibre us postal service team treks that Lance Armstrong rode. Lemond were owned by Trek at the time. The true temper platinum ox steel is a similar if not slightly better quality to Reynolds 853. Earlier models were 853 but Lemond chose to switch to this for the latter models.
Frame sizings are
Seat tube 53cm
Top tube 55cm. ( frame has a slight sloping geometry so the actual horizontal length would be more like 57cm )
130 rear spacing, 27.2mm seat tube, British threaded bottom bracket ( shimano 105 bb included)
Comes with matching Lemond carbon fork
Frame is very light and also rides really well, the stiffness of carbon matched with the subtle ness of very good quality steel
There are two points where the paint has flaked off and as a result there is some surface rust which could do with a rub back and the paint touching up, and it has the usual signs of use from a 10 year old bike ( scuffs, paint chips, cable rub etc) so it's not perfect
As such I'm looking for £230 posted
Firstly is a mauricio sannino Columbus genius steel road frame
Seat tube is 58cm (centre to top)
Top tube is 55.5cm
Head tube is 15cm
It takes a 1inch fork and a 27.2mm seatpost, Italian threaded bottom bracket and a rear spacing of 130mm
It's very light weighing 1.67kg for a 58cm frame. Genius tubing is up there with the best steel framesets. Mauricio Sannino is a famous Italian frame builder who has supplied frames for the U.S.S.R national track team. Very nice frame, it has horizontal drop outs so could be built as a fixed wheel or single speed bike but also has a derailleur hanger for gears as well. Frame is in very good condition
£200.posted (Frame only)
Also I have a Lemond Buenos Aires frame and fork.
It's a combination of oclv carbon fibre and true temper ox platinum steel. The oclv is the same as the carbon fibre us postal service team treks that Lance Armstrong rode. Lemond were owned by Trek at the time. The true temper platinum ox steel is a similar if not slightly better quality to Reynolds 853. Earlier models were 853 but Lemond chose to switch to this for the latter models.
Frame sizings are
Seat tube 53cm
Top tube 55cm. ( frame has a slight sloping geometry so the actual horizontal length would be more like 57cm )
130 rear spacing, 27.2mm seat tube, British threaded bottom bracket ( shimano 105 bb included)
Comes with matching Lemond carbon fork
Frame is very light and also rides really well, the stiffness of carbon matched with the subtle ness of very good quality steel
There are two points where the paint has flaked off and as a result there is some surface rust which could do with a rub back and the paint touching up, and it has the usual signs of use from a 10 year old bike ( scuffs, paint chips, cable rub etc) so it's not perfect
As such I'm looking for £230 posted
