Hope Twin Pot Brakes...C3????

[Harryburgundy]

Just pulled a set of Hope brakes off a mates bike.....stamped '3' and look like C2's but twin-pot.
No rotors (but will supply if we can get them off)
Was serviced by Hope about 12 months ago, unused since but will no doubt need some attention.
By no means mint...but not half bad either.
Rear hose 148mm, front 100mm
Pictures later
Are these worth £75 Posted????
Cheers
Carl

 

[Harryburgundy]

Here we go...some poor pictures...sold as seen..and offers invited

 

[JeRkY]

The 3 refers to the caliper mount type, 3 being the most useful as it is effectively IS. It is from the day before a fixed standard on caliper mounts was agreed on.

They are M4 brakes. (or maybe XC4...I think they are both similar looking)

I also think the instrument you measured the hoses with may be out by a factor of 10 (mm/cm)

 

[P20]

M4/E4/O4 brakes. Will run 180 front/ 60 rear

 

[Harryburgundy]

They are M4 brakes. (or maybe XC4...I think they are both similar looking)

I also think the instrument you measured the hoses with may be out by a factor of 10 (mm/cm)

Thanks for the info and yes x10