Hope Disc Sizing Question

[FRSMark]

OK, the XC4's are hopefully going to be fitted to 203mm rotors. My question is apart from the obvious adaptor I'll require for the caliper, will any 203mm hope disc be OK?

I was thinking of Aligator type ones from Fleabay.

 

[dyna-ti]

I've always been used to plain round common or garden variety rotors
I did try the saw tooth design edge but it squealed like a pig getting killed,when i went back to round the noise stopped :?
Could of course just be my set up as these types are used with many systems ,and without any problems
To me ,the more metal in contact between the pads will do more for stopping power more than anything else [IMHO]
So fancy rotors with more holes,fancy edge etc might not be such a good thing

 

[Andy B]

Could be issues with the floating rotors, the rivets nay catch on the calliper (they do on some other non Hope calipers)

 

[cyfa2809]

im probably wrong but dont hope use 200mm or 205mm rotors? its probably model specific but might be worth a check first

 

[P20]

XC4 were 150 or 160(post mount) or 170(with adapter). Thats some adapter to 203

I'mt thinking they're not XC4. What caliper number is on them?