B bowsho Retro Guru Feedback View Feb 14, 2013 #1 Hi, does anyone know what adapter I need to put hope tech x2 brakes onto my RC300 frame? I'm using a 160mm rotor. Thanks
Hi, does anyone know what adapter I need to put hope tech x2 brakes onto my RC300 frame? I'm using a 160mm rotor. Thanks
Whatleymeister Retrobike Rider Gold Trader Feedback View Feb 14, 2013 #2 There are two you could get as far as I see it, the cheapy Avid one that should work just fine: http://www.chainreactioncycles.com/Mode ... elID=15031 Or a more expensive and bawdy anodised one: http://www.chainreactioncycles.com/Mode ... elID=50124 Can't see why the Avid would be any worse given the cost difference, but there you go!
There are two you could get as far as I see it, the cheapy Avid one that should work just fine: http://www.chainreactioncycles.com/Mode ... elID=15031 Or a more expensive and bawdy anodised one: http://www.chainreactioncycles.com/Mode ... elID=50124 Can't see why the Avid would be any worse given the cost difference, but there you go!
1210tech Senior Retro Guru Feedback View Feb 14, 2013 #3 Or there's the Hope one which I think matches the frame better: http://www.chainreactioncycles.com/Mode ... elID=13738 You still building your 300 or have you finished it and these are upgrades? You got a build thread up?
Or there's the Hope one which I think matches the frame better: http://www.chainreactioncycles.com/Mode ... elID=13738 You still building your 300 or have you finished it and these are upgrades? You got a build thread up?
B bowsho Retro Guru Feedback View Feb 15, 2013 #4 Just picked up a brand new hope one off eBay for £7! Build is finished apart from the brakes and chain, going into the LBS for setting up soon with pics to follow!
Just picked up a brand new hope one off eBay for £7! Build is finished apart from the brakes and chain, going into the LBS for setting up soon with pics to follow!