jimihendrix
MacRetro Rider
A pair of Hope BigUn hubs, five bolt discs (180mm and 160mm), a pre I.S front caliper (fits staight onto Marzocchi Z1's), rear hub is the 130mm axle version, rear caliper mounts onto and forms part of drop out, i have the special nut for the end of the QR in my toolbox somewhere, this will be included, rear caliper has a seatstay clamp for a GT LTS but the hub and caliper could be fitted straight to any frame and a seatstay clamp easily made or adapted.
Also included is a set of new countersunk rotor bolts, calipers have good pads fitted.
The hubs are nice, no cracks, bearings are fine and rear hub is nice and clicky, front hub is standard QR.
The calipers worked fine last time they were used, reason they ended up stripped is the levers seized, did intend to rebuild the levers but time passed and i lost interest in the bike which is now long gone.
Levers have been stripped and have some parts missing but will include these and what other parts i have but buyer should assume they are going to need C2 Sport or Pro levers and hoses.
These hubs and calipers are pretty rare as a complete kit.
Asking £110 posted to UK.
Also included is a set of new countersunk rotor bolts, calipers have good pads fitted.
The hubs are nice, no cracks, bearings are fine and rear hub is nice and clicky, front hub is standard QR.
The calipers worked fine last time they were used, reason they ended up stripped is the levers seized, did intend to rebuild the levers but time passed and i lost interest in the bike which is now long gone.
Levers have been stripped and have some parts missing but will include these and what other parts i have but buyer should assume they are going to need C2 Sport or Pro levers and hoses.
These hubs and calipers are pretty rare as a complete kit.
Asking £110 posted to UK.
