FS-26"BOSDeville160, F120RLC RP23Kash Decade Atlas Hope

albash82

Kona Fan
Feedback
View
BOS Deville 160mm, 26" 2013 20mm, Tapered steerer, long (will measure today).
These are awesome forks, only reason i'm selling is i've gone to a 29er and can't keep 2 bikes!
They have 1 small mark on the left stanchion, which happened during transport. It's not far up the left leg, so will be under sag most of the time.
A few cosmetic marks.
I will get them serviced before posting to you.
£500





Fox 32 F120 RLC FiT 2011 Kashima QR15
I took these off my hardtail around a year ago, at which point they were working fine. Since then, the rebound and compression adjusters have seized. In my wisdom, I used some mole grips on the rebound adjuster and snapped it off! I'm sure the part would be available from mojo if you have the knowledge to fix it.
They had a lowers service at some point but could probably do with another.
There's a few marks on the stanchions, which you can see in the pics. I will also take some more detailed pics for you if interested. The marks are only light and shouldn't really be too much of an issue, but there are a few.
Also the paint on the crown is lifting where salt has got in. This could be stripped and repainted.
I've still got the original box
Non-tapered 1-1/8 Steerer is generous at 198mm
£175 ono





Fox RP23 Kashima Rear Shock 215x64 (Fits Nomad etc)
Great condition, comes with 22x8mm bushes F&R
£165 posted



E13 SRS Chainguide, white. ISCG05
£50 posted.

E13 XCX Chainguide, BB mount. Black guide recently replaced.
£20

Hope Traditional Headset 1&1/8" Gunsmoke
£30 posted

Hope Seatclamp Q/R Gunsmoke 31.8
£8 posted

Kinesis Decade Virtue Frame (MK1) 20" Black
Has a few marks from wear and the odd stone chip.
£130 posted

RaceFace Atlas Cranks. Silver (Raw), HollowtechII style
Have had granny ring tabs ground off.
£50 posted.




Hope Bottom Bracket, Ceramic, Gunsmoke, comes with 1x spare ceramic bearing.
Currently fitted with SRAM GXP convertor, but can supply without.
£50 posted (£55 with GXP).





Hope Bottom Bracket, stainless, Black. VGC
£45 posted.



XT Right Hand - I-Spec (MK1) Shifter. Will also fit new Hope Tech3 lever.
£35 posted

 
Re: FS-26" Pro2 ZTRFlow&355, 26"BOSDeville160 RP23Kash Decad

Hi,
Interested in the ceramic Hope b/b pending a question.
Pm on the way too.
 
Re: FS-26" Pro2 ZTRFlow&355, 26"BOSDeville160 RP23Kash Decad

Interested in...
1 Pair 26" Hope Pro 2 Hubs, Red, laced with DT competition silver spokes to Stan's NoTubes ZTR 355 Rims, black.

Would like to see pics please :)
 
Re: FS-26" Pro2 ZTRFlow&355, 26"BOSDeville160 RP23Kash Decad

Did I miss the photos?
 
Re: FS-26" Pro2 ZTRFlow&355, 26"BOSDeville160 RP23Kash Decad

Hi, still waiting on pics of the Hope ceramic bearing b/b and gxp sleeve.
Thanks
 
Re: FS-26" Pro2 ZTRFlow&355, 26"BOSDeville160 RP23Kash Decad

Hi guys, sorry for crappy comms, I picked up a nasty bug last week and have been ill since. Most of the parts are at work. I am stuck at home until hopefully tomorrow. Will get you pics then.
 
Re: FS-26" Pro2 ZTRFlow&355, 26"BOSDeville160 RP23Kash Decad

Also interested in...

1 Pair 26" Hope Pro 2 Hubs, Red, laced with DT competition silver spokes to Stan's NoTubes ZTR 355 Rims, black.
Taped with NoTubes yellow tape & Valves
£135 posted.
 
Re: FS-26" Pro2 ZTRFlow&355, 26"BOSDeville160 RP23Kash Decad

Pictures of this, please.

1 Pair 26" Hope Pro 2 Evo Hubs, Black, laced with DT Competition black spokes to Stan's NoTubes ZTR Flow Rims, black.
Front - 20mm, Rear - Q/R (can supply adapter of choice at cost)
Taped with NoTubes yellow tape, Valves, sealant & a pair of Maxxis High Roller II tyres (Front - 2.4 EXO, Rear - 2.3 EXO Tubeless Ready)
£215 posted
 
Re: FS-26" Pro2 ZTRFlow&355, 26"BOSDeville160 RP23Kash Decad

So I finally got some pics of the wheels..... I'm rubbish at this game!
 
Back
Top