Frames with a 1 14 headtube

[baron von greenback]

That will look good seen post like that thought were carbon are they the ones that came with the fs they rare

 

[brocklanders023]

Ok thanks guys what about 98 orange p7 or they 1inch

That will be 1 1/8th mate. Only 1 1/4 Orange were the Elite and O from memory.

 

[baron von greenback]

It's a standard Ringle grey post. Colour scheme will be Blue Ano to match the forks

What size is the seatpost on your manitou mate

 

[baron von greenback]

If you could find one - a Chris King Devolution headset would be perfect. This fits the 1 1/4" head tube but allows you to use 1 1/8" threaded steerer forks. Your quill stem would also be a 1 1/8" size.
A 1 1/4" quill stem won't fit into a 1 1/8" steerer because of the internal diameter.


Cheers
boy"O"boy

Cheers could I change the quill out of the 114 stem to a 118 then put a shim onto the top of the 118 to fit into the 114 and then the bottom of the quill would be 118 then if I leave the stem a little proud of the 118 headset and fill in the gap with spacers is that possible mate

 

[Siish]

Cheers could I change the quill out of the 114 stem to a 118 then put a shim onto the top of the 118 to fit into the 114 and then the bottom of the quill would be 118 then if I leave the stem a little proud of the 118 headset and fill in the gap with spacers is that possible mate

The safest way is a reducer to make 1 1/4 to 1 1/8 headset and use forks/ stems to suit