Frame id needed.. painted over Titanium? Team USA. Nice!

[rydelhigh]

regarding ti russian frames there were some called Titanium Red. There are examples on RB.

BUT....I think this is your frame. Noodles, guides, seat post clamp, dropouts are all there.

The KGB Cycles Mig 3.3

View attachment 1008084

That looks almost identical.. I found another example

 

[Frankenorange]

my invoice is in the post

 

[rydelhigh]

my invoice is in the post

Thank you!

Here's another good example (raw)

 

[TheRadioGuyUK]

Can’t help with id of it’s type - but don’t be surprised to find multiple metals - pure one metal frames are few and far between. Often they aren’t found on factory bikes unless they’ve sourced a wholesale supply of specialist build frames built to an OEM spec.

Where you do get factory built cycles with pure build frames, it’s usually the first series (usually short production) using hi grade specialist sourced frames, later production/series use reduced cost less pure single metal frames.

But there are often mixed sections especially around join sections that aren’t one metal due to rigidity/resilience workaround choices.

Try actually designing, and doing the obligatory FEA simulation runs to determine the rigidity and actual stress factors, and you rapidly understand why sometimes the end result of a production frame is less than as pure as the concept.

Believe or not, just building or designing based on theory or baseline designs can equally create an unfit for purpose design even if it’s technically (by theory) bombproof strong.

Just thought it was worth mentioning since the dark magic and sorcery of construction rarely gets mentioned.

 

[Frankenorange]

Can’t help with id of it’s type - but don’t be surprised to find multiple metals - pure one metal frames are few and far between. Often they aren’t found on factory bikes unless they’ve sourced a wholesale supply of specialist build frames built to an OEM spec.

Where you do get factory built cycles with pure build frames, it’s usually the first series (usually short production) using hi grade specialist sourced frames, later production/series use reduced cost less pure single metal frames.

But there are often mixed sections especially around join sections that aren’t one metal due to rigidity/resilience workaround choices.

Try actually designing, and doing the obligatory FEA simulation runs to determine the rigidity and actual stress factors, and you rapidly understand why sometimes the end result of a production frame is less than as pure as the concept.

Believe or not, just building or designing based on theory or baseline designs can equally create an unfit for purpose design even if it’s technically (by theory) bombproof strong.

Just thought it was worth mentioning since the dark magic and sorcery of construction rarely gets mentioned.

yeah....those mass produced aluminium frames from Asia are really few and far between. Same for all those mass produced gas-pipe frames unless you mean the filler material for brazing being the mixed metal joint.

 

[Uncle Grumpy]

Believe or not, just building or designing based on theory or baseline designs can equally create an unfit for purpose design even if it’s technically (by theory) bombproof strong.

Just thought it was worth mentioning since the dark magic and sorcery of construction rarely gets mentioned.

I don't want to argue with you, because it would be unfair, but construction is actually a science and not magic or sorcery.

And I'm a fan of mixed metal. LA Glam, Scandinavian death metal, thrash, NWOBHM... all part of life's rich tapestry.