Cook Bros inner bolts and spacers

[Bollox64]

Need some spacers and longer bolts, so I can set-up my inner chainring on some Cook Bros cranks.

I have read elsewhere that the spacers need to be 7.1mm and the bolts 15mm under the head.

Anyone know if these fit?

http://www.sjscycles.co.uk/ta-vega-carm ... prod17293/

Or does anyone have any available?

Cheers / Alec

 

[Rampage]

With 15mm bolts they are probably a bit too short. It's worth contacting them though.
I sell 18mm bolts and spacers. I'm making some spacers this week if you want some.

 

[Tizumo]

Re:

I have a set of spacers which are 7.62mm/0.3". They should be the originals but..
I have found very little information about the exact measurements of the spacers in general. Somebody said he was using 8mm spacers, somebody less, somebody depending on the thickness of the chainwheel..

 

[Bollox64]

With 15mm bolts they are probably a bit too short. It's worth contacting them though.
I sell 18mm bolts and spacers. I'm making some spacers this week if you want some.

PM sent

 

[darreni]

Re:

If you don't mind hanging on until later in the week, i'll take off a bolt & spacer from my RSR's & post the pics and measurements.

 

[Bollox64]

Re: Re:

If you don't mind hanging on until later in the week, i'll take off a bolt & spacer from my RSR's & post the pics and measurements.

No worries, looks like I can source from Rampage. Thanks for the offer.