Cannondale Pepperoni Forks - 1 1/4" steerer

[rjsdavis]

Any colour as will be resprayed...

Many thanks!

 

[shirley]

Re:

1 1/4" Pepperonis - did you get hold of any? I have some, have been meaning to re-home them. If interested, please confirm minimum steerer length as they have come off a small frame (threaded headset set up). Excellent condition, I replaced them with shox years ago.

I also have a (new?) 1 1/4" threaded headset if you're interested. Let me know and I'll dig out details / specs / photos.

 

[rjsdavis]

Hello there

Thanks for replying. I'll double check the steerer length required, but the frame it's required for is defo not a small. Would guess that it was a 19/20 inch from memory. Will measure up this evening and come back to you for sure...

 

[shirley]

The steerer is 14cm measured from the crown race. To confirm, they are for a 26" wheel with v brakes. Came off a Killer V circa 1993.

Just to let you know, I'm off on hols from saturday morning (don't want to suddenly disappear off the radar ...)

 

[whayne]

Re:

hi

could i have them if the other guy does not want them

regards

 

[shirley]

Re:

Of course, will wait to hear what he comes back with. Excellent condition, resprayed metallic blue when i had the frame done as a back up plan but put the shox back on instead.

 

[emjay]

I have a set of pepperoni forks in red which I had in mind for a build but no longer have the time to start.
Let me know if you are interested and I will measure hem up.
Cheers.

 

[rjsdavis]

The steerer is 14cm measured from the crown race. To confirm, they are for a 26" wheel with v brakes. Came off a Killer V circa 1993.

Just to let you know, I'm off on hols from saturday morning (don't want to suddenly disappear off the radar ...)

Hi Shirley

Thanks - unfortunately, the forks I need will need to be a 160cm steerer.... just measured up. Thanks very much for replying to the thread though.

 

[rjsdavis]

I have a set of pepperoni forks in red which I had in mind for a build but no longer have the time to start.
Let me know if you are interested and I will measure hem up.
Cheers.

Thanks Emjay - what size do you have?

 

[emjay]

Rjsdavis.

The steerer length is 16cm without crown race. 4cm of this is threaded.
Another member has contacted me regarding them, if he drops out I will PM you.
Cheers.