Can anyone tell me if there is a fork on ebay that fits....

[carnell]

I have a crazy light steelnickel-plated one in 1” but it looks like only 150ish steerer so not enough if that’s your head tube length? . I’ll measure the steerer if you’re interested.

They look very nice thanks, I will measure it up tomorrow,

 

[carnell]

@carnell I assume your 17.5" has a 130 headtube? Not so up on titanium models. If so with your stack your going to need around 165mm steerer. (35mm stack height HS).

I will measure up and figure this out, thanks for your help.

 

[Black_puma]

I am pretty sure it should be a 1 1/8" steerer, not 1" , the catalogue states oversize, make sure to measure it first.

 

[carnell]

I have a crazy light steelnickel-plated one in 1” but it looks like only 150ish steerer so not enough if that’s your head tube length? . I’ll measure the steerer if you’re interested.

Hello
I went to my LBS, I willl need a fork with a 160mm steerer, and I have it confirmed that it's a 1incher, would you be able to measure your nickel one up for me, they look great. Been all over ebay, just one Ritchey logic for $299!!, and having a hard time finding one with a long enough steerer.

 

[Rotorhead]

It’s 148mm I’m afraid.

 

[Dave_Mars]

Like this?

https://ebay.us/m/xRprYk

 

[bikeworkshop]

Like this?

https://ebay.us/m/xRprYk

That's quite a crude item.
I'm sure you can find something better.

 

[Dave_Mars]

Might be easier to go ahead

 

[carnell]

Might be easier to go ahead

Thanks for the reply, my LBS told me that I need a 160mm steerer, as 150mm would be too short..... I've found it impossible to find a 1 inch fork for a couple of weeks now.

 

[bikeworkshop]

Ahead isn't going to be a lot easier to find.
I'll poke around in the fork forest tomorrow 26, canti boss, est 380-395 a/c, 1" threaded 160mm
It's dark in there.
I will need a machete and a head torch.