88 Stumpy stickers advice needed

[JJ.]

Hi all.

I have an 88 Stumpy which I am currently restoring.
I gently heated and removed the stickers using a heat gun.
Obviously the glue stayed on the frame.

Does anyone know what type of glue I need to stick them back on with.
I've google to high heaven and found nothng.

The are in good condition with only a couple of dings/ holes so I dont really want to get them copied. As they are original I'd like to reuse them.

BTW I can scan them if anyone wants me to.

They have cme off the red/white stumpy and are basically blue and yellow

 

[gil_m]

Please scan them before trying to re-fit :shock:

I think you will find it very hard to re-fit, you could use a 3M spray mount but this will not be a long term solution

If you scan them before you do anything with them at least they can be reproduced if the re-mount job does not work

It's always so much easier to re-draw from a flat image than a photo of it wrapped round a frame, overal measurements help a lot too, just to confirm the scans

Hope this helps

 

[The Ken]

Could I get a copy of the scans and sizes when you do them please, I will get a stumpy at some point.

 

[makster]

Please scan them before trying to re-fit :shock:

I think you will find it very hard to re-fit, you could use a 3M spray mount but this will not be a long term solution

If you scan them before you do anything with them at least they can be reproduced if the re-mount job does not work

It's always so much easier to re-draw from a flat image than a photo of it wrapped round a frame, overal measurements help a lot too, just to confirm the scans

Hope this helps

These are the exact ones I contacted you about Gil, but in a different colour.
If I can get a scan, can you play with the colours?

 

[gil_m]

Are these the decals in question?