Had these two partial groups kicking about for ages.
First up is a 1050/ 1051 group consisting of:
Chainset - Biopace 42, 52 rings, 170mm crankarms
Front mech - dirty, writing has gone
Rear mech - Dirty, but otherwise good
Gear levers - dirty and missing the mounts - 6 speed
All needs a clean and polish but will be quite a nice group when done. I've held onto this as I have a certain fondness for this era of 105.
(Note 105 levers not included)
£35 posted
---------------------------------------------------
Second up is a Adamas AX partial group consisting of:
Parapull brake calipers - Just need a polish, a bit special imo
Brake levers - to match calipers, one has had a token polish, grey hoods
Front mech - fine
Rear mech - fine
Gear levers - fine, friction, no mounts
Pedals - big comfortable platform pedals, missing 2 screws from one of the toeclips
£50 posted
More pics of both groups here: http://s597.photobucket.com/albums/tt55 ... %20adamas/
I also have a 600EX headset and large flange Shimano hubs built into a reasonable wheelset that will complement the Adamas group very well. I'll add these to the Adamas group for £120 all in.
First up is a 1050/ 1051 group consisting of:
Chainset - Biopace 42, 52 rings, 170mm crankarms
Front mech - dirty, writing has gone
Rear mech - Dirty, but otherwise good
Gear levers - dirty and missing the mounts - 6 speed
All needs a clean and polish but will be quite a nice group when done. I've held onto this as I have a certain fondness for this era of 105.
(Note 105 levers not included)
£35 posted
---------------------------------------------------
Second up is a Adamas AX partial group consisting of:
Parapull brake calipers - Just need a polish, a bit special imo
Brake levers - to match calipers, one has had a token polish, grey hoods
Front mech - fine
Rear mech - fine
Gear levers - fine, friction, no mounts
Pedals - big comfortable platform pedals, missing 2 screws from one of the toeclips
£50 posted
More pics of both groups here: http://s597.photobucket.com/albums/tt55 ... %20adamas/
I also have a 600EX headset and large flange Shimano hubs built into a reasonable wheelset that will complement the Adamas group very well. I'll add these to the Adamas group for £120 all in.
