1994 Klein Fervor

sksmith2500

Dirt Disciple
Good evening.
For background on my Fervor, please see here: viewtopic.php?f=1&t=419949&p=3078716#p3078716

Below is my current parts list. Some parts are from when I bought the frame in 1994.

Frame: 1994 Klein Fervor

Fork: Manitou 4 (Rebuilt - New seals, bushings, clips, knobs & elastomers)

Headset: Cane Creek S2 or IRD Technoglide (Have the Cane Creek, would need to order the IRD)
Stem: Control Tech
Handlebar: Kalloy Uno (ordered off of Ebay) Control Tech (NOS - Arrived)
Grips: Lizard Skins (New)
Barends: None Control Tech Control Stix

Brakes: Shimano M737 XT Cantilevers (until I can find a nice set Suntour XC Pro CT-XP01 canti's) Suntour XC Expert Cantilevers (On Order)
Brake Pads: Kool Stop
Brake Cables: Suntour Hardliner (NOS - Arrived)
Cantilever cable hangers: Avid Tri-Align or Shimano Onza Chill Pills - Green
Brake Levers: Suntour 8-Speed ErgoTec ES-ST00

Shifters: Suntour 8-Speed ErgoTec ES-ST00
Front Derailleur: Suntour XC-Pro FD-XP01-GXH
Rear Derailleur: Suntour XC-Pro RD-XP00-GXB (Arrived)
Derailleur Cables: Suntour Accushift (NOS)
Cassette: Suntour 8-Speed CS-AP20-S8 (NOS) - Will use a KMC Z8 and keep the NOS chain
Chain: Suntour CH-AP10 (NOS)
Cranks: Suntour XC-Pro Micro Drive or Cook Brothers Racing "E" Cranks
Crank Bolts: Klein
Chainrings: Suntour Micro Drive (42/32/20) or Vuelta SE Plus (44/32/22)
Chainring bolts: Generic anodized green aluminum (On Order)
Bottom Bracket: Klein Press Fit
Pedals: Shimano PD-M324 SPD or Crank Bros Egg Beaters

Hub Skewers: Odyssey Svelte Titanium
Rims: Mavic X222 32 Hole (NOS)
Front Hub: Suntour XC-Pro w/ Grease Guard
Rear Hub: Suntour XC-Pro 8-speed Freehub w/ Grease Guard (On Order)
Nipples: Wheelsmith green anodized aluminum
Spokes: Wheelsmith double butted 14/15/14g
Tyres: Panaracer Smoke / Dart Classics - Reissue (Arrived)
Tubes: Panaracer

Saddle: Vetta TT TriShock - Dated 1994 (Arrived)
Seatpost: Control Tech 27.2
Seatpost Binder: Odyssey Svelte Titanium

Some component pics, nothing exotic:

gMf7O0E.jpg


BCdQIYN.jpg


V7ONJwo.jpg


pWPVKEs.jpg


nMVGxEC.jpg


dR8utqe.jpg


E1mtvPE.jpg


KKAnWtT.jpg
 
Last edited:

sksmith2500

Dirt Disciple
Most of the parts that I ordered have arrived. I found a nice set of Suntour XC Expert cantilevers on Ebay, so ordered them instead of using the Shimano XT cantilevers.
Probably wait until after the new year to have the wheels built, then I can start the rebuild.
 

sksmith2500

Dirt Disciple
Thanks guys.
Not much happening at the moment. Have everything, just need to build the wheels. Too many other projects at the moment.
Probably Feb. or Mar. before I get back to this.
Steve
 

sksmith2500

Dirt Disciple
Some rebuild progress today. Screwed up on the bars, wasn't thinking & got 31.8mm instead of 25.4mm. Oops!
Now on the search for some nice bars. Edit: Found a nice Kalloy UNO flat bar on Ebay.
Also, I did not like the Suntour XC-Expert canti's, so I'm sticking with the Shimano XT's until I find a nice set of Suntour XC-Pro's with the front adjustment. And I lost my crank removal tool, so one is on order.
But it already looks much better with the Manitou 4, gumwall tires and old school hubset!

Rebuild Progress 04-03-2021.jpg
 
Last edited:

sksmith2500

Dirt Disciple
SunTour XC-Pro derailleurs & cranks installed.
Also installed, but not visible, new internal cable liners to replace the old.
XC-Pro Crank.jpgXC-Pro 02.jpg
 
Top