sparkybhp
Senior Retro Guru
Thanks - I’ll let you know on those.I have a set of the right stem and bars for this. The stem is black and the bars red which is opposite to mine. ..Shout if interested
1988 ‘dale sm600. 24/26
- Thread starter sparkybhp
- Start date
sparkybhp
Senior Retro Guru
Little bit of progress on this.
Gave the Brooks this came with a couple of dabs of proofide top and bottom, then used a couple of cable ties to try and get the shape back:
Not sure if this will end up going back, I have another option which I had a go at re-covering this afternoon:
I’m getting better at saddle refurbs, should probably get some slightly thinner vinyl. What I’m using is off-cuts from a leather sofa which I took apart in order to get it to the tip in my car(!)..
Wheels both needed a hub service - both went well, very little wear on these luckily..
Oh, and I had to make a tool to get the freewheel off:
I used an old 17mm socket, cut some notches in it and ground some flats for a spanner on the opposite end - the q/r keeps it in place while you unscrew it..
Lovely..
Gave the Brooks this came with a couple of dabs of proofide top and bottom, then used a couple of cable ties to try and get the shape back:
Not sure if this will end up going back, I have another option which I had a go at re-covering this afternoon:
I’m getting better at saddle refurbs, should probably get some slightly thinner vinyl. What I’m using is off-cuts from a leather sofa which I took apart in order to get it to the tip in my car(!)..
Wheels both needed a hub service - both went well, very little wear on these luckily..
Oh, and I had to make a tool to get the freewheel off:
I used an old 17mm socket, cut some notches in it and ground some flats for a spanner on the opposite end - the q/r keeps it in place while you unscrew it..
Lovely..
sparkybhp
Senior Retro Guru
Little bit more progress made. Frame is at the powder coaters now getting a fresh coat of gloss black. Spoke to Gil @ retrodecals and he’s sorted me out for a new set of decals (legend), so they’re in the post too.
I won a nos correct stem for this on eBay and that arrived, it’s black but that’s ok for now. Not sure if I’ll paint it red or not, the saddle won’t be red so it might just look out of place. I’ll get the bike together and then decide.
The Brooks B17 that was on it got the 50 shades treatment..
Lol, a couple of good doses of Proofide and then leave it to get its shape back. I have since rubbed it down with 800 and polished it with boot polish. Had to do that as it looks like the previous owner rattle canned it along with the frame..
Next step was to clean off the old paint from the components and get them ready for paint:
I managed to get a single pair of dia compe 983’s off eBay too (top of pic) to replace the Deore II ones it came with.
Got all these bits in primer, hopefully top coat tomorrow:
I want to give the paint as long as possible to cure before I re-assemble the bike so the sooner they’re painted the better.
I won a nos correct stem for this on eBay and that arrived, it’s black but that’s ok for now. Not sure if I’ll paint it red or not, the saddle won’t be red so it might just look out of place. I’ll get the bike together and then decide.
The Brooks B17 that was on it got the 50 shades treatment..
Lol, a couple of good doses of Proofide and then leave it to get its shape back. I have since rubbed it down with 800 and polished it with boot polish. Had to do that as it looks like the previous owner rattle canned it along with the frame..
Next step was to clean off the old paint from the components and get them ready for paint:
I managed to get a single pair of dia compe 983’s off eBay too (top of pic) to replace the Deore II ones it came with.
Got all these bits in primer, hopefully top coat tomorrow:
I want to give the paint as long as possible to cure before I re-assemble the bike so the sooner they’re painted the better.
sparkybhp
Senior Retro Guru
Components are drying off nicely, two coats of paint and two coats of lacquer.
I went for Peugeot Graphite Grey, which seemed a close match on the can but it’s come out a bit dark. Ho hum, think it’ll be alright once it’s back together - heck of a lot better than it was.
26” tyre arrived, ordered one and received two (bonus!), just waiting on the 24” for the rear.
I went for Peugeot Graphite Grey, which seemed a close match on the can but it’s come out a bit dark. Ho hum, think it’ll be alright once it’s back together - heck of a lot better than it was.
26” tyre arrived, ordered one and received two (bonus!), just waiting on the 24” for the rear.
Synthiaks
Senior Retro Guru
sparkybhp
Senior Retro Guru
Yes - many sentimental items in my man cave!
Back from powder coaters today, stay tuned for updates!
Mod-Master
Cannondale Fan
- Feedback
- View
How much did it cost for a powdercoat and who did you use?
Similar threads
Latest posts
-
-
🇬🇧 Dave lloyd bees neez MTB pro test bike 🐝 British steel
- Latest: 27motorhead
-
-