Wanted 1 inch Shimano Crown Race

[markoc]

As above. Not sure if these are interchangeable?

I need a crown race for a set of forks to go into a bastard mix of an STX and an LX headset. Hoping Shimano crown races for threaded headsets are interchangeable...

 

[Minifreak]

I have a few, might have one that suits if you have any ideal what it looks like?

 

[markoc]

Thanks - that'd make it too easy lol, I have no idea - was hoping there was a "standard" shimano fitment.

How different can 1 inch crown races be...? (he says!)

 

[Minifreak]

I’ll send pics pics of what I have

 

[Minifreak]

Thought I had more 1”, got a few 1 1/8” so this one is all I have in the smaller size.

Let me know if looks suitable.

 

[markoc]

Hmmm, I'm not sure that's going to be the right profile as it is quite pronounced. I'll do some googling...

 

[iveto1983]

Problem you’ll have is some Shimano headsets were cartridge bearing and some were caged ball bearings, so will need different races.
I think all cartridge races were the same at least.

 

[markoc]

Problem you’ll have is some Shimano headsets were cartridge bearing and some were caged ball bearings, so will need different races.
I think all cartridge races were the same at least.

Good info... thanks. This is looking harder than I thought it might be. The STX bottom cup bearings look to be caged. I have bits of an LX that I'm using too. I need to go back through everything and work out what I have and haven't got.