Search results for query: *

Hi, I'm interested in the old Formula Standard - IS Standard or PM adapter. I have a Bomber Z1 96 with both of the old Formula mounts. I only have the information available on this site and on the internet, and it's enough to make this adapter, unfortunately I don't work with the type of...

Re: Hi alric! Thanks for the offer, but unfortunately i have the pro-wind´s. Cheers

Hi, Like Woz i also recommend loctite 243. But if you cant find it, you can also use teflon tape, usually used for plumbing works, it should do the trick! Cheers

Re: Hi, If the motive is gripshift compatibility i would recommend the shimano xt trekking disc brakes. Its a 3 finger lever though, but would solve your problem nice£i ;) Cheers

Hi! I´m looking for a Marzocchi red spring kit for Bomber and Jr. T forks with 100mm travel. The springs have 185mm length and the part number is #5141114 New or used! Cheers

Re: Hi, Do you by any chance are able to post the Thudbuster to PT? Cheers

Re: I´m interested in the brakes. Do you post to other countries besides UK? Cheers

AHAH I see what you did there :wink: I was looking to one of the steel ones i have here (17 years old) and no the Alu steerer isnt just beautiful, its about 110gr lighter by my calculations, with the same height of 230mm. I weighted 180gr for the new 286mm Alu steerer. A steel one with...

This is my feedback thread. Hope to make good, quick and smooth deals with the users of this Great Community as I am too a Retrobiker from the 90´s, living in Lisbon PT. Please be honest as I am, and all will work out well for both. Thanks! Cheers

Realy nice guy, easy to deal with and communicate, answered all my questions and its was very quick to post! It was a good deal for me, i hope it was for him too. I would buy him another steerer if i could. Highly recommended! Thanks! Cheers

Just received one of the alu steerer's, NOS and it´s really beautiful! Thanks a lot OldFatTi, You´re the Man! Cheers

Re: Giant MPH 3 F/R disc brakes £20 posted. Thanks! They are in very good condition. But am looking for STD calipers (not IS) for an old Marzocchi, so these dont fit unfortunately... when i see "std" in brakes i always have to ask. Cheers

Re: Giant MPH 3 F/R disc brakes £20 posted. If these are the 48,5mm caliper i´m interested! Cheers

Cheers! I am also interested in: 30mm oil and dust seals (850690) 30mm bushings (850693) extra hard springs 185mm -100mm (5141190) dampening cartdrige for Z1 (703529KR-C) oh and very important, decals or stickers! if there are crowns it could be of interest also. All depends of how much €...

Hi, I would look for a Tange! They made them in aluminium and chromoly like the Impact. Some have sealed bearings if you like low maintenance. Cheers

Yes it was! Specially the part when you grease the balls (the ones located on the cranks side) then you cant see them while you assemble the pedal, and get out of the track. They are alive as soon as you grease! I had to use a wood tooth pic to show them the way :D EDIT: Sorry, the balls that...

Hi, Two weeks ago i had to repair my left one, after disassembling the pedal completely and comparing to the right one, i saw that the spring (located in the outer edge, inside the pedal) was slightly more open, and it will loosen and detach from the secure hole, when you try to attach your...

Hi, I recently bought a Tange to replace a UN-91 in my 94 AA. Quality wise i think i made a very good buy, because the bearings in the Tange are sealed and replaceable. I went for a 68X113 (triple chainrings). Look here: http://www.ebay.co.uk/itm/Tange-Sealed- ... 1e7530aebf Regards

That will be hard to find... If, you can measure the outer diameter and post here it will be better, because i found this: http://www.ebay.com/itm/Tektro-1276a-Se ... 1c311ee05c EDIT: maybe one of these can fit in the salsa seat clamp: http://www.ebay.com/itm/REAR-BRAKE-CABL ... 3a82c19df5 :)

Hi! Look here: http://sheldonbrown.com/seatpost-sizes.html#k It´s the same of my 1994 AA EDIT: If you dont have the original seat clamp to look i think the one that came with the frame is 30.7mm Here is one for you: http://www.chainreactioncycles.com/Mode ... elID=87066 Regards ;)