Giant MPH 3 F/R disc brakes. SOLD

trail-blazer

Retro Guru
Brakes are in good working order with decent pad life. They have a few cosmetic issues but no leaks etc.

I was going to use them on my beater but the rear hose is a tad short for my bike - the front was fine on a 100mm suspension fork.

They are std IS mount but I just bought a Giant PM adaptor that lets you use the front brake on a PM fork with a 180mm rotor.

Pictures and hose measurements up soon.
 
Re: Giant MPH 3 F/R disc brakes £20 posted.

poncho":1ajg9h8r said:
If these are the 48,5mm caliper i´m interested!

Cheers

I'm not sure what about the 48.5mm sizing? They are the standard caliper which works with a 164mm rotor when fitted to an IS mount without an adaptor.

The hoses are front - 780mm, rear - 1200mm. This includes the fittings - subtract 40mm if you measure without including them.

The lever's reservoirs are scuffed from the bike being upside down. One of the lever's dust seals has some cracking - it is only a dust seal and there are no fluid leaks or sticky pistons.

That's about it really.

Pics in two minutes...
 
Re: Giant MPH 3 F/R disc brakes £20 posted.

Thanks!

They are in very good condition.
But am looking for STD calipers (not IS) for an old Marzocchi, so these dont fit unfortunately... when i see "std" in brakes i always have to ask.

Cheers
 
Back
Top