Wanted Hope Big un rear QR adapter(s)

[Daz95]

Hi, long shot but does anyone have a non-drive side qr adapter (or a set) for a rear hope big un? The set up I currently have is using the floating hope disc caliper with linkage bar to the canti mount, so doesn’t have a non drive side qr adapter if the disc brake is removed (it has the drive side adapter).
Thanks

 

[Eyebrows_454]

Hi, long shot but does anyone have a non-drive side qr adapter (or a set) for a rear hope big un? The set up I currently have is using the floating hope disc caliper with linkage bar to the canti mount, so doesn’t have a non drive side qr adapter if the disc brake is removed (it has the drive side adapter).
Thanks

I’m currently missing all my drive side components for my blue big un, seems like we make a whole hub

 

[boxxer]

OP you need a full length axle and spacer not just the spacer, the axle was short for the brake arm set up if you just put a QR through it will snap

 

[baron von greenback]

Theres a couple of hope big uns disc on rims on ebay if that helps

 

[Daz95]

OP you need a full length axle and spacer not just the spacer, the axle was short for the brake arm set up if you just put a QR through it will snap

Ah had a feeling that might be the case. Thanks for the info, looks like I’m needing an axle as well then

 

[boxxer]

i have a few axles so might have a big un rear that I can sell, need to check the stash later

 

[Steventreagus]

Hi, long shot but does anyone have a non-drive side qr adapter (or a set) for a rear hope big un? The set up I currently have is using the floating hope disc caliper with linkage bar to the canti mount, so doesn’t have a non drive side qr adapter if the disc brake is removed (it has the drive side adapter).
Thanks

Hi, long shot but does anyone have a non-drive side qr adapter (or a set) for a rear hope big un? The set up I currently have is using the floating hope disc caliper with linkage bar to the canti mount, so doesn’t have a non drive side qr adapter if the disc brake is removed (it has the drive side adapter).
Thanks

How much you willing pay

 

[Eyebrows_454]

Hi, long shot but does anyone have a non-drive side qr adapter (or a set) for a rear hope big un? The set up I currently have is using the floating hope disc caliper with linkage bar to the canti mount, so doesn’t have a non drive side qr adapter if the disc brake is removed (it has the drive side adapter).
Thanks

This any good to you?

 

[Steventreagus]

How much you asking for this and what's wrong with it

 

[Eyebrows_454]

How much you asking for this and what's wrong with it

Looking for 65, it’s missing all the drive side components like the freehub, pawls, spacer and end cap
It also has 3 rotor bolts stuck in (I didn’t get too far with drilling them out lol)
Bearings seem smooth and in overall decent condition
South wales based