Blonde Moment With Purple Canti's

Jussa · May 21, 2012

Ok i've got these Dia-Comp Purple Ano Canti's which i am (Was) going to clean up and use on a build, the trouble is the locating pin from the spring wont locate onto the hole on the Canti mounts (See Picture) Or do i just bolt them on as tight as i can? Then if i do that what provides spring pressure to reset the Cantis after breaking is applied?

Am i doing something wrong? Am I having a Blonde Moment, maybe watching to much TOWIE

lol

Please anyone, shed some light on this

benbonty · May 21, 2012

The spring is not supposed to go into the hole on the brake boss with these brakes, you achieve tension on the spring with a spanner on that nut at the back, then lock the fixing bolt down whilst keeping the spring tensioned with the spanner.

Jussa · May 21, 2012

benbonty":cyla6gqi said:
The spring is not supposed to go into the hole on the brake boss with these brakes, you achieve tension on the spring with a spanner on that nut at the back, then lock the fixing bolt down whilst keeping the spring tensioned with the spanner.

Doh!!! yes the penny drops, of course......... Thanks for that, back to the build in ernest

Cheers once again

Jussa

Blonde Moment With Purple Canti's

Jussa

Attachments

benbonty

Senior Retro Guru

Jussa

Similar threads

Latest posts