Front derailleur frustrations

[synchronicity]

What cups are they? Photo?

 

[synchronicity]

You sure it's not Italian threaded?

 

[27motorhead]

Good old Italian threaded BB!

 

[novocaine]

put it on the it's wheels. there is no better way to hold the frame when dealing with BB shells.

 

[moonlite]

What cups are they? Photo?

Shimano BB-UN52 BB -- square taper with the 22-spline shell. I have the correct tool -- I'm just struggling to keep everything solid while I apply sufficient pressure.

 

[novocaine]

should also note, a decent, long breaker bar can be a great help. if that doesn't work, a cheater bar can help. if that doesn't work, warm it up. if warming it doesn't work, fire, because it can't be tight if it's liquid.

 

[27motorhead]

Shimano BB-UN52 BB -- square taper with the 22-spline shell. I have the correct tool -- I'm just struggling to keep everything solid while I apply sufficient pressure.

Are you using anything to keep the spline tool pulled-in against the frame? Under lots of torque they can twist out. You'll want to use a crank bolt and a BIG washer to hold things tight against the frame and then a large spanner (adjustable will suffice) rather than a 1/2" drive ratchet or breaker bar. You may be doing this already?

 

[27motorhead]

This

Bottom Bracket Removal Guide

This bottom bracket removal guide answers the all important question - How to Remove a Bottom Bracket?

www.londoncyclist.co.uk

 

[Woz]

Sometimes just letting WD40 do it's stuff over about a week works wonders.

With the frame on it's side, try to drown each cup in turn and leave it overnight.

 

[moonlite]

This

Bottom Bracket Removal Guide

This bottom bracket removal guide answers the all important question - How to Remove a Bottom Bracket?

www.londoncyclist.co.uk

Yes, all the standard, conventional steps. Done it umpteen times -- this time it's not working. Will keep dosing it with penetrating oil and try some heat.